Old 08-07-2002, 09:15 PM
AAATreeLandscape AAATreeLandscape is offline
LawnSite Member
Join Date: Aug 2002
Location: MA
Posts: 35
Covering sprinkler head with 1' of loom???

I'm doing a job where the customer wants to bring the ground level up about a foot. There are two sprinkler heads that are going to be covered and the customer wants to know if there is an extension we can put on the existing heads. Please help!
Reply With Quote
Old 08-07-2002, 10:36 PM
Chuck Sinclair Chuck Sinclair is offline
LawnSite Senior Member
Join Date: Aug 2000
Location: Sacramento, Ca
Posts: 336
You should be able to extend the riser to the sprinkler, if it was installed that way.
Reply With Quote
Old 08-08-2002, 12:24 AM
rvsuper's Avatar
rvsuper rvsuper is offline
Senior Member
Join Date: May 2002
Location: Rock Valley, IA
Posts: 930
Or there might be a swing joint or swing pipe on it. Just get a good hold of it and pull it up.
Reply With Quote
Old 08-08-2002, 10:38 AM
HBFOXJr HBFOXJr is offline
LawnSite Bronze Member
Join Date: Jul 2001
Location: Southern New Jersey
Posts: 1,706
The head is probably not on a long enough swing assy to raise it a foot. REmove the exisiting assy and install a new one with enough tube so that when raised the assy is at no more than a 45 degree angle above horizontal. Also by adding and extra street el between the spiral barb fitting and the head you get nice adjustability in any direction.

If you don't know what we're talking about, go to the Hunter website and look at their residential design manual.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:46 PM.

Page generated in 0.06554 seconds with 10 queries