Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 10-06-2010, 10:04 PM
z4ce z4ce is offline
LawnSite Member
 
Join Date: Mar 2010
Posts: 2
How to adjust tracking on an Ariens ZOOM Zero Turn?

Hi All,

I have an Ariens ZOOM 1640 I bought in the spring. When I replaced the blades in the spring, I also adjusted the tracking. I did get it tracking straight forward, however it set the tracking off in reverse, which makes doing zero turns more difficult.

Today I was changing the blades again and fooling around with the tracking to try to get both forward and back tracking straight. I can't for the life me figure it out. From what I can tell there are two possible adjustments.

One is the nuts that connect the linkage to the hydrogear. The other is a screw where the linkage connects to the lever. I can't seem to find any kind of adjustment to increase the top-end forward and slow down the reverse. Any ideas? Or does anyone have the service manual for the 1640?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:47 AM.

Page generated in 0.05622 seconds with 7 queries