application longevity

[SKYNYRD]

this is a picture of the cardboard baler at my job. at least 2 months ago i sprayed this part down with fluid film so the wheel would spin easy when you open and close the gate while making the actual bale. just look at how wet the threads still are... WD-40 would be dry by now as would most(if not all) other lubricating substances but the fluid film is ever bit as wet and slick as when i first sprayed it

[Dano50]

Nice pic and application! Thanks for sharing!

[SKYNYRD]

i should pay attention and post another pic in say a monthtry to see if there's any difference

[Dano50]

Good idea. I'd like to see the progress.

[SKYNYRD]

at least twice a day a bale is made so that's at least 4 times a day that wheel is turned over those threads. so lets see that's 14 bales a week so that's 28 times a week so roughly 224? times that wheel has been turned over those threads since the initial application and it's still that wet

[Dano50]

Now that is impressive (Not that I ever had any doubts)!

[SKYNYRD]

if this thread convinces even one naysayer to change their opinion then it was worth it

[a plus bob]

George you carry Fluid Film with you ?? Kinda like the guy on the T.V. comercial that stops and tightens the bolts on a stop sign.Skynyrd stopping rust one can at a time!!

[SKYNYRD]

i keep a can at work with me cause hey ya never know what will need the special powers only ff can provide

[Dano50]

Originally Posted by SKYNYRD

i keep a can at work with me cause hey ya never know what will need the special powers only ff can provide

You are a very wise man, indeed.