Go Back   LawnSite.comô - Lawn Care & Landscaping Business Forum, Discuss News & Reviews > Sponsor Forums - Discuss with Sponsors Directly > Lawn Mowing Equipment & Accessories * * * * SPONSOR FORUMS > Hustler Turf Equip
User Name
Home Products Find a Dealer News About Us Contact Us Mark Forums Read

Hustler Turf Equip Lawn Mowers & Turf Care Equipment

Thread Tools   Display Modes
Old 01-08-2011, 04:21 PM
rjcruiser rjcruiser is offline
LawnSite Member
Join Date: Jan 2011
Location: Covington, GA
Posts: 18
ZT 2800 s leaking

Went to start the mower today after about 2 months of inactivity and noticed some oil on the shed floor. Started it up and both hydros were leaking. Both from the same spot...on the underside, two small bolts hold a cover on and theres a circular seal around that cover. That is where it appears the leak is coming from. Can I get new seals? Also, what lb torque are those bolts to be at? I already tried to tighten one up and it just sheared right off....so now I got to replace a bolt as well and extract the stud

It is a Mini Z 42" model number 928200. Has 240 hours on it.
Reply With Quote
Old 01-14-2011, 05:29 PM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,753
E-mail me and I will reply to you with the service / parts manual on the hydro units.
Reply With Quote
Old 01-14-2011, 09:04 PM
rjcruiser rjcruiser is offline
LawnSite Member
Join Date: Jan 2011
Location: Covington, GA
Posts: 18
e-mail sent....thanks!
Reply With Quote
Old 02-25-2011, 02:33 PM
okievarmint okievarmint is offline
LawnSite Member
Join Date: Aug 2008
Location: Middle, Ok
Posts: 30
Hustler part# for charge pump cover o-rings: 603223 MSRP= 1.30
Be sure the cover and bolts go on in the EXACT position they were removed.
Reply With Quote
Old 03-01-2011, 10:11 PM
rjcruiser rjcruiser is offline
LawnSite Member
Join Date: Jan 2011
Location: Covington, GA
Posts: 18
Ended up the cover was warped. Ordered the cover only and it is to be here this week. I'll put it all back together and hopefully it will be sealed nice and tight.

Thanks for the advice.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 08:18 PM.

Forum Rules:

This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.

All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.

LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
Lawnsite,  Plowsite, WeldingWeb, LawnCareSuccess, Everythinggreen, & Lawnbusiness.net are trademarks of Lawn Care Success, Inc

Page generated in 0.06503 seconds with 7 queries