Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 02-07-2011, 07:36 PM
meets1's Avatar
meets1 meets1 is offline
LawnSite Gold Member
 
Join Date: Feb 2004
Location: NW, Iowa
Posts: 3,580
DEWALT 24 volt problem with drill

Guys your my last resort and probably the best resort. Didn't no where to put this thread so here it is.

I have looked for an hour on the net for problem shooting our drill. Nothing. I found many places for parts, ordering, getting new ect. I have a DW006 Drill. When there is a bit in it it will turn but under load or pressure just by hand - nothing. Whats the deal and what do I need to order.

Too good of drill to let go unless it cost to much to repair!

Thanks for the info and time.
Reply With Quote
  #2  
Old 02-07-2011, 08:09 PM
Swampy's Avatar
Swampy Swampy is offline
LawnSite Bronze Member
 
Join Date: Aug 2006
Location: Hartland, WI
Posts: 1,424
how old is the battery? I'd start there.
__________________
Landscape Engineering Service
US Army 372nd EN Co 12N

Picture Thread: http://www.lawnsite.com/showthread.p...ight=army+pics
Reply With Quote
  #3  
Old 02-07-2011, 08:28 PM
meets1's Avatar
meets1 meets1 is offline
LawnSite Gold Member
 
Join Date: Feb 2004
Location: NW, Iowa
Posts: 3,580
I think the battery si good. i have the sawsaz and skill saw. They work fine with the batteries. The drill runs but when put underload with a bit - the drill works but the chuck/bit does nothing. Just left dewalts website and nothing there either.
Reply With Quote
  #4  
Old 02-07-2011, 08:52 PM
GunnPropertyServices GunnPropertyServices is offline
LawnSite Senior Member
 
Join Date: Mar 2010
Location: Leesburg, FL
Posts: 375
gonna have to take it in to a Authorized repair shop, sounds like the shaft is broke between the motor and the chuck, i had the same problem with my Rigid impact.
Reply With Quote
  #5  
Old 02-07-2011, 09:26 PM
meets1's Avatar
meets1 meets1 is offline
LawnSite Gold Member
 
Join Date: Feb 2004
Location: NW, Iowa
Posts: 3,580
Hate taking it in. I have replaced a few things on our 18 volt stuff. Tricky to get back together but they all work great so far.
Posted via Mobile Device
Reply With Quote
  #6  
Old 02-08-2011, 06:33 PM
Swampy's Avatar
Swampy Swampy is offline
LawnSite Bronze Member
 
Join Date: Aug 2006
Location: Hartland, WI
Posts: 1,424
If not the batteries it might be the clutch thats in it. I burned one out on a milwaukee, it was stopping hard and clicking then it just went out and won't spin at all. Sounds like your stuck between a rock and a hard place.
__________________
Landscape Engineering Service
US Army 372nd EN Co 12N

Picture Thread: http://www.lawnsite.com/showthread.p...ight=army+pics
Reply With Quote
  #7  
Old 02-08-2011, 08:28 PM
meets1's Avatar
meets1 meets1 is offline
LawnSite Gold Member
 
Join Date: Feb 2004
Location: NW, Iowa
Posts: 3,580
Thats just it - tear apart and hope it all works when back together or forget the drill - keep batteries for the other tools and move on or go buy another 24 volt drill/hammer.
Reply With Quote
  #8  
Old 02-09-2011, 07:04 PM
South Florida Lawns's Avatar
South Florida Lawns South Florida Lawns is offline
LawnSite Platinum Member
 
Join Date: Apr 2005
Location: usa
Posts: 4,740
Your best bet is tearing it apart.
Reply With Quote
  #9  
Old 02-10-2011, 09:28 PM
zabmasonry zabmasonry is offline
LawnSite Senior Member
 
Join Date: Oct 2007
Location: C. VT
Posts: 281
I agree-

Tear it apart, You will find that they are really not that complicated and you can figure out where issues are pretty quickly. Just make sure that you do it on a clean surface and be wary of small parts dropping out.
__________________
UVM SBA 2012
Reply With Quote
  #10  
Old 02-10-2011, 10:47 PM
Knight511 Knight511 is offline
LawnSite Member
 
Join Date: Mar 2009
Location: North Texas
Posts: 207
It is broke now... if you tear it apart and can't fix it, what are you out? A couple of hours? Tear it down and see if you can fix it... if not, scrap it.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:20 PM.

Page generated in 0.10100 seconds with 7 queries