The Green Industry's Resource Center

Old 02-09-2011, 08:26 AM
soonercrew soonercrew is offline
LawnSite Member
Join Date: Mar 2010
Location: tulsa,ok
Posts: 90
where is my post???

any reason why my post hasnt shown up???
Old 02-09-2011, 03:43 PM
The Toro Company The Toro Company is offline
LawnSite Senior Member
Join Date: Feb 2009
Posts: 354
Hi soonercrew,

Thank you for your patience and sending us more information. Here is what I have received so far:

Toro has reviewed the photos you have attached and has spoken to the dealer. The Toro Z MASTER Z400 is designed as a finish cut mower to be used on residential lawns that are cut every week during the mowing season. It is not a rough cut or pasture grass mower. The rule of thumb is to only remove 1/3 of the grass blade up to one inch of grass per mowing. If weather conditions do not allow you to mow often enough raise the deck and cut only one inch off at a time and slow down the ground speed to allow the mower to be able to process the grass thru the mowing chamber. As you mention if the unit were to be used to cut customers lawns for profit you would be doing this every week and the quality of cut will be just fine.

For more detailed information we would need the model number of your mower.

Thank you,
The Toro Company

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 09:51 PM.

Page generated in 0.05960 seconds with 8 queries