Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 02-03-2011, 07:14 PM
swanny swanny is offline
LawnSite Senior Member
 
Join Date: Jan 2009
Location: mt. airy maryland
Posts: 557
Looking for asv rc30 drive motor parts

ASV dealers can only sell me entire drive motor....$1600

Local Eaton distributors can sell me drive motor...$850 but can't get it till June (proprietary part built for ASV).

My wheel mount flange (where the drive motor gets bolted to the frame...4 bolts) is cracked around the shaft seal....

Looking for a good one if anyone has an old drive motor laying around...will pay for it. PM me. Thanks!

Called many a salvage yard with no success.
Reply With Quote
  #2  
Old 02-03-2011, 08:31 PM
swanny swanny is offline
LawnSite Senior Member
 
Join Date: Jan 2009
Location: mt. airy maryland
Posts: 557
Found this place that specializes in ASV parts (might be helpful to someone, just not me today):

http://www.trackloaderparts.com/?asvparts

RC30 drive motors are $1400 PT30 drive motors are $900. Eaton vs. Sauer
Reply With Quote
  #3  
Old 02-03-2011, 09:04 PM
flairland's Avatar
flairland flairland is offline
LawnSite Senior Member
 
Join Date: Feb 2006
Location: Ontario, Canada
Posts: 640
How did this happen? Did the outer drive bearing go first?
Reply With Quote
  #4  
Old 02-04-2011, 07:59 AM
swanny swanny is offline
LawnSite Senior Member
 
Join Date: Jan 2009
Location: mt. airy maryland
Posts: 557
Quote:
Originally Posted by flairland View Post
How did this happen? Did the outer drive bearing go first?
Good question... some (swann) body was in a hurry and tried to drive the shaft seal outwards and cracked the housing around it in a couple places before they knew what was going on. Hard to believe they get so much money for these units...they are pretty simple inside.
Reply With Quote
  #5  
Old 02-04-2011, 12:35 PM
skidsteer's Avatar
skidsteer skidsteer is offline
LawnSite Member
 
Join Date: Jun 2009
Location: Northern Ontario
Posts: 135
try loaderpartssource.com
__________________
S185, LS160 Hi Flow, Concrete Mixer, Tiller, Lanscape rake, Land plane, Trencher, Auger, Brusher, Tilt Tatch, Hoe, Stump Grinder, Grapple, Ram3500
Cable Skidders, Grapple Skidders, Semi w Float, Pulp and pole trailer, Wood Loader slasher,
Reply With Quote
  #6  
Old 02-04-2011, 02:54 PM
swanny swanny is offline
LawnSite Senior Member
 
Join Date: Jan 2009
Location: mt. airy maryland
Posts: 557
Quote:
Originally Posted by skidsteer View Post
try loaderpartssource.com
Yes, did try them yesterday...they were looking. Thanks!
Reply With Quote
  #7  
Old 02-05-2011, 12:11 AM
Ausman Ausman is offline
LawnSite Senior Member
 
Join Date: Jan 2008
Location: Queensland Australia
Posts: 262
go see a dealer and he will have a bundle of them with broke drive motor shafts! what is your serial number?
Reply With Quote
  #8  
Old 02-23-2011, 01:15 AM
greyim greyim is offline
LawnSite Member
 
Join Date: Mar 2010
Location: Tas Australia
Posts: 33
drive motor parts rc30

Hi again Swanny...
parts here arealso pretty exy of course, I'm paying $850 for shaft and seals.
Whilst I wait, does the whole motor have to come out or can I get away with taking off the just the front end do you think?
Graham down under
Reply With Quote
  #9  
Old 02-23-2011, 06:47 AM
swanny swanny is offline
LawnSite Senior Member
 
Join Date: Jan 2009
Location: mt. airy maryland
Posts: 557
Quote:
Originally Posted by greyim View Post
Hi again Swanny...
parts here arealso pretty exy of course, I'm paying $850 for shaft and seals.
Whilst I wait, does the whole motor have to come out or can I get away with taking off the just the front end do you think?
Graham down under
I'd say pull the whole thing to make life simple. I R&R'd a drive motor last evening without taking off the track or any wheels. Took about 2.5 hours.
Reply With Quote
  #10  
Old 03-02-2011, 02:57 PM
greyim greyim is offline
LawnSite Member
 
Join Date: Mar 2010
Location: Tas Australia
Posts: 33
R&R'd

2.5 hrs wish you were my mechanic... took me about 7 hrs each way. but that includes trips to the shop for thisnthat and sanity breaks!
But how do you get motor out without removing wheels???!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:09 AM.

Page generated in 0.09548 seconds with 9 queries