Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 03-05-2011, 06:44 PM
ant's Avatar
ant ant is offline
LawnSite Silver Member
 
Join Date: Jan 2000
Location: dirty jersey
Posts: 2,414
trailer tire worn on the inside (single axel trailer))

Seems to be worn almost to the belts on the inside of doth tires. Normal? Is rotation recommended?
Posted via Mobile Device
Reply With Quote
  #2  
Old 03-05-2011, 10:36 PM
Coastal Lawn Maintenance Coastal Lawn Maintenance is offline
LawnSite Senior Member
 
Join Date: Nov 2008
Location: VA
Posts: 479
how long have you gone on them. sounds like you have a toe out. or you could have a bent axle.
Reply With Quote
  #3  
Old 03-05-2011, 10:47 PM
knox gsl's Avatar
knox gsl knox gsl is online now
LawnSite Gold Member
 
Join Date: Jun 2010
Location: knoxville, tn
Posts: 3,656
Sounds like a bent axle or installed wrong.
__________________
I've never been skydiving, but I have zoomed-in on Google Earth really fast.
Reply With Quote
  #4  
Old 03-05-2011, 10:56 PM
ParkWelding ParkWelding is offline
LawnSite Member
 
Join Date: Jun 2005
Location: Averill Park, NY
Posts: 182
Or overloaded.
Reply With Quote
  #5  
Old 03-07-2011, 12:52 AM
SouthValleyLandscapeMaint's Avatar
SouthValleyLandscapeMaint SouthValleyLandscapeMaint is offline
LawnSite Member
 
Join Date: Jan 2009
Location: Talent, Oregon
Posts: 71
bent axle from overloading the trailer
Reply With Quote
  #6  
Old 03-07-2011, 01:06 PM
djagusch djagusch is offline
LawnSite Gold Member
 
Join Date: Mar 2006
Location: MN
Posts: 3,440
Worn bearings I have seen do this before.
Posted via Mobile Device
Reply With Quote
  #7  
Old 03-07-2011, 04:25 PM
bobw bobw is online now
LawnSite Senior Member
 
Join Date: Oct 2006
Location: Calgary, Alberta
Posts: 808
I only ever owned one single axle trailer and it did the same thing. When I went to trade it in, they had to replace the axle, it was bent. Or in actuality, it was straight. There is supposed to be a slight bow UP on the axle but mine was perfectly straight.
__________________
this space left intentionally blank
Reply With Quote
  #8  
Old 03-12-2011, 02:35 PM
cms289's Avatar
cms289 cms289 is offline
LawnSite Member
 
Join Date: Nov 2009
Location: DFW Texas
Posts: 81
Bent, yep.

I had a single axle, I wanted brakes (was towing with a ranger), so when I replaced it I went with a 5200 torsion axle. It was TOTAL overkill, but it took the weak, known to bend 3500# axle out of the mix. Was only 100 bucks more than the 3500 axle. I never had uneven tire wear. All I did was rotate them when I did the truck!!! They guy i sold it to used it for his bike racing, see it all the time. He has never had an issue. I got a 16x7 cheap cause the axles and springs are bad, i am going to rebuild it for a Legend car, and I will be doing the same thing, 2 5200 for the 2 3500. I would not do it unless you use the torsion axles, as the leaf spring type would bounce too much IMO.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:01 AM.

Page generated in 0.08564 seconds with 7 queries