Register free!


Reply
 
Thread Tools   Display Modes
  #1  
Old 04-16-2011, 01:54 PM
Exact Rototilling's Avatar
Exact Rototilling Exact Rototilling is online now
LawnSite Platinum Member
 
Join Date: Jun 2007
Location: Zone: 5B
Posts: 4,879
Feedback on Ryan tow behind aerators but not 3 point hitch.

Ok who here has used either one of these or both? Also interested in results set up with double tines for the 3 x 3 pattern vs. the standard 6 x 6 pattern? And the added weight that would be required. Or forget the double tine and just do a double pass?

I currently don't have any tow vehicle for either and possibly would end up with a utility vehicle to tow it?

This year I'm pricing aerations based on plug count per square foot and I'm actively pushing the more plugs angle is "really better for YOUR LAWN" and worth more $.


http://www.ryanturf.com/products/tur...ors/renovaire/

http://www.ryanturf.com/products/law...ire_towbehind/
__________________
Posted via Mobile Device
Reply With Quote
  #2  
Old 04-17-2011, 09:19 PM
americanlawn's Avatar
americanlawn americanlawn is offline
LawnSite Fanatic
 
Join Date: May 2006
Location: midwest
Posts: 5,675
Been using the Ryan pull-behinds for over 20 years. Hydraulic lift - not 3-point, cuz you can't turn and aerate with a 3-point aerator. We tried doubling the tines, but the plug depth was too shallow, so we ended up going with 1.5 number of tines. We also add 50 lbs of (John Deere) weights. Total width = 48". Actual aeration width = 36". Shallowest plugs we pull = 1 inch (dry soil). Deepest plugs = 3 1/2 inches. It pulls out more plugs than anything else we have ever used except for our TURFCO aerators.

My guys really like the Turnaire w/sulky. They are very fast, and we are also able to do some trim areas. We've used the Turnaire w/sulky for many years, and they seem to hold up better than any other aerator we have ever used. Our most preferred manufacturer would be TURFCO. Made in the USA, they answer their phones, they usually ship parts the same day, and TURFCO is "proactive" -- ie: if there is equipment that needs upgraded, they let us know ahead of time, and they have shipped upgrades at no charge (at THEIR expense). BTW this is one just one reason we are running T3000 spreader/sprayer units. If we need a part, it's here within 24 hours.

Our Ryan pull-behinds work well much of the time (we pull them with John Deere 445's). But you have to be careful climbing slopes and on soft soils. Getting parts is also an issue. Last time we ordered Ryan aeration parts, it took about 2 months. TURFCO = "next day". Go figure.
__________________
Proud subscriber of TURF Magazine. (thanks Ron)
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 11:44 AM.

Page generated in 0.06215 seconds with 9 queries