Go Back   LawnSite.comô - Lawn Care & Landscaping Business Forum, Discuss News & Reviews > Sponsor Forums - Discuss with Sponsors Directly > Lawn Mowing Equipment & Accessories * * * * SPONSOR FORUMS > Hustler Turf Equip
User Name
Password
Home Products Find a Dealer News About Us Contact Us Mark Forums Read


Hustler Turf Equip Lawn Mowers & Turf Care Equipment

Reply
 
Thread Tools Display Modes
  #1  
Old 06-16-2011, 10:54 PM
mdale mdale is offline
LawnSite Member
 
Join Date: Jun 2010
Location: Indiana
Posts: 51
fastrak sd leaving straglers/uncut strips

I have a 2010 fastrak super duty 25/54 that I bought last fall and now have 35hrs. Since new it will leave straglers when mowing and when mowing taller grass (5-6" grass and I cut at 3 1/4") it will leave two strips of unmowed/taller grass to the inside of each rear tire track. I have healthy grass with few weeds.

I have checked and the dealer has checked that the blades are sharp, the correct part number, and are on correct, that the deck is level side to side and a 1/4" pitch to the front, belt tension is good, tire pressures set,deck is kept clean.

The dealer came out and check the cut and agreed that it was not cutting as it should in taller grass and tried cutting a couple different ways by over lapping passes and different width passes putting the front tire left or right of the strip, only solution was to mow at 1/2 speed.

My dealer is great and has been a great help, but I bought this mower for its speed and quality of cut. Hoping that you'll a solution for this.

Thank-you
__________________
Hustler Fastrak Superduty 54/25
Reply With Quote
  #2  
Old 06-20-2011, 03:36 PM
mowerconsultant's Avatar
mowerconsultant mowerconsultant is offline
LawnSite Fanatic
 
Join Date: Feb 2000
Location: Syracuse, NY
Posts: 9,751
I would agree with your dealer, I would also not take as much of in a single pass, this may help with going a little faster.
The deck can only process grass so fast, height and speed are the main areas that are going to control this.

Pj
__________________
Reply With Quote
  #3  
Old 06-20-2011, 08:31 PM
mdale mdale is offline
LawnSite Member
 
Join Date: Jun 2010
Location: Indiana
Posts: 51
Thanks for the reply, I'm really disappointed after sending this much money that this mower cannot out perform my 15yr old JD. I really like everything else about Hustler but the cut is unacceptable from this level of mower, I guess I'll have to see how much of I hit I'll take on trade and look into other brands.
__________________
Hustler Fastrak Superduty 54/25
Reply With Quote
  #4  
Old 06-23-2011, 07:41 PM
GCAT GCAT is offline
LawnSite Member
 
Join Date: May 2010
Location: Clovis, Ca.
Posts: 11
I have the same mower and if the lawn it too tall I also have same problem. I'm also mulching, you may want to try to cutting more offen... When the grass is really thick is when I have the issue.

I do agree with thinking the mower should handle it... I couldn't beleive it also..
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:38 PM.

Forum Rules:

This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.

All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.

LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
Lawnsite,  Plowsite, WeldingWeb, LawnCareSuccess, Everythinggreen, & Lawnbusiness.net are trademarks of Lawn Care Success, Inc

Page generated in 0.07098 seconds with 7 queries