Toro belt length

[anixon92]

TORO 30156 36" WALK BEHIND.
parts book shows #1-323629 belt.
does anybody know the length of the belt. try to pick up a aftermarket belt.
thanks
allen

[dutch1]

Deck belt or traction belt?

My 2006 Gates book list a traction belt, Toro #269670. Gates #6840. 40" belt.
Gates doesn't show a deck belt.

If it's a deck belt, measure it. With a pen, mark a line on the outside of the belt then use a tape measure to work your way around the belt, holding both the tape and belt as you go.

[piston slapper]

Originally Posted by dutch1

Deck belt or traction belt?

My 2006 Gates book list a traction belt, Toro #269670. Gates #6840. 40" belt.
Gates doesn't show a deck belt.

If it's a deck belt, measure it. With a pen, mark a line on the outside of the belt then use a tape measure to work your way around the belt, holding both the tape and belt as you go.

Thats a 1/2" belt 40 inches long

Just though I'd tighten up the measurements...

Dutch...check you PM's

[anixon92]

its the belt going from motor to deck.
i got the other shorter belt going from motor to transaxle.
i need the one from motor to deck.
i dont have one to measure, mower came without belt.

[piston slapper]

Sorry., I dont have a listing on that belt

[Restrorob]

Well heck.... I couldn't even pull a hat trick on that one !

My guess is it's a odd size due to so little adjustment on the tension idler arm, But I did find this to be the cheapest place I ran across to get one; http://www.mowpart.com/m7/Toro/p1368...duct_info.html