Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #21  
Old 08-14-2011, 02:29 PM
FIMCO-MEISTER's Avatar
FIMCO-MEISTER FIMCO-MEISTER is offline
LawnSite Fanatic
 
Join Date: May 2007
Location: Red State America
Posts: 18,734
Thanks Jim. This is all giving me tired head. Think I'll mosey away...........
Reply With Quote
  #22  
Old 08-14-2011, 02:30 PM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 39,707
Franklin Electric bought Jacuzzi, so that complicates the searching


I found a few inexpensive replacement shaft seals for Jacuzzi, less than $20 ~ I may have a master catalog for Jacuzzi packed away somewhere.

http://store.poolcenter.com/jacuzzi-...0-p157132.aspx

Last edited by Wet_Boots; 08-14-2011 at 02:38 PM.
Reply With Quote
  #23  
Old 08-14-2011, 02:38 PM
FIMCO-MEISTER's Avatar
FIMCO-MEISTER FIMCO-MEISTER is offline
LawnSite Fanatic
 
Join Date: May 2007
Location: Red State America
Posts: 18,734
Found a place that had parts for a DB3 but they were all listed as obsolete.
Reply With Quote
  #24  
Old 08-14-2011, 03:12 PM
1idejim's Avatar
1idejim 1idejim is online now
LawnSite Fanatic
 
Join Date: Jul 2009
Location: State of Jefferson
Posts: 6,862
i have an o-ring and seal kit that fills most obsolete voids
Reply With Quote
  #25  
Old 08-14-2011, 03:15 PM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 39,707
Quote:
Originally Posted by FIMCO-MEISTER View Post
Found a place that had parts for a DB3 but they were all listed as obsolete.
You can check your Grainger catalog for a number 200 shaft seal. There is an industry standard for these things, and all the links for a Jacuzzi seal say it's a 200
Reply With Quote
  #26  
Old 08-14-2011, 08:11 PM
FIMCO-MEISTER's Avatar
FIMCO-MEISTER FIMCO-MEISTER is offline
LawnSite Fanatic
 
Join Date: May 2007
Location: Red State America
Posts: 18,734
But if it was recommended to me to replace all the parts when I disassemble? seems a shame to go through all this trouble and not new everything up.
Reply With Quote
  #27  
Old 08-14-2011, 08:27 PM
Mike Leary's Avatar
Mike Leary Mike Leary is offline
LawnSite Fanatic
 
Join Date: Mar 2007
Location: Port Angeles, Washington
Posts: 20,572
Quote:
Originally Posted by FIMCO-MEISTER View Post
But if it was recommended to me to replace all the parts when I disassemble? seems a shame to go through all this trouble and not new everything up.
Or buy a fresh one with warranty.
Reply With Quote
  #28  
Old 08-14-2011, 08:29 PM
FIMCO-MEISTER's Avatar
FIMCO-MEISTER FIMCO-MEISTER is offline
LawnSite Fanatic
 
Join Date: May 2007
Location: Red State America
Posts: 18,734
i guess I can do that and use the existing motor?
Reply With Quote
  #29  
Old 08-14-2011, 08:40 PM
Mike Leary's Avatar
Mike Leary Mike Leary is offline
LawnSite Fanatic
 
Join Date: Mar 2007
Location: Port Angeles, Washington
Posts: 20,572
Quote:
Originally Posted by FIMCO-MEISTER View Post
i guess I can do that and use the existing motor?
For a boat anchor.
Reply With Quote
  #30  
Old 08-14-2011, 08:55 PM
Wet_Boots's Avatar
Wet_Boots Wet_Boots is online now
LawnSite Fanatic
 
Join Date: Mar 2005
Location: metro NYC
Posts: 39,707
Pump and parts may be discontinued. At 11 years of age, the innards should be fine. Buy a shaft seal and play around with the pump some Sunday afternoon when the football game stinks.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:54 AM.

Page generated in 0.09081 seconds with 7 queries