Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 08-15-2011, 05:43 PM
Mike Leary's Avatar
Mike Leary Mike Leary is offline
LawnSite Fanatic
 
Join Date: Mar 2007
Location: Cactus Hug, Arizona
Posts: 20,552
Quote:
Originally Posted by WalkGood View Post
That means shop-vac to me! Is that a type of glue?
That's a quick-set glue.
Reply With Quote
  #12  
Old 08-15-2011, 06:07 PM
greenmonster304's Avatar
greenmonster304 greenmonster304 is offline
LawnSite Silver Member
 
Join Date: Jul 2007
Location: You Know
Posts: 2,453
Quote:
Originally Posted by WalkGood View Post
greenmonster Have you yourself used the utility conduit rolls? Would be better than gluing sticks together.

Was the pool job low voltage or 120v? Did you use conduit sticks on this job or irrigation poly?
The pool job I used 10' sticks of 1" grey PVC for high voltage. The utility poly is great if you can find it. It's the same stuff as verizon uses. It is not UL listed for conduit so legally you would have to use a UF cable inside but it is much easier than PVC. It's better than irrigation poly because when some landscaper digs it up he thinks twice about hacking at it with a spade because it's bright orange.
Posted via Mobile Device
Reply With Quote
  #13  
Old 08-15-2011, 09:16 PM
Mdirrigation Mdirrigation is offline
LawnSite Bronze Member
 
Join Date: Dec 2003
Location: Maryland
Posts: 1,405
Its absolutly no different from pulling sprinkler pipe , bell ends go to the back , glue and twist the pipe , and pull , use a chinese finger . You can pull the pipe right away . i pull for 5 or 6 electricians , they love the plow . As far as the wire , under 100 ft , fish tape , over 100 ft the string asd shop vac work as long as you up size the string to a small rope and use some lube .
Reply With Quote
  #14  
Old 08-15-2011, 10:30 PM
WalkGood WalkGood is offline
LawnSite Bronze Member
 
Join Date: Jun 2006
Location: Long Island, NY
Posts: 1,910
How deep do you guys get the pvc pipe via the puller?
Reply With Quote
  #15  
Old 08-15-2011, 11:16 PM
WalkGood WalkGood is offline
LawnSite Bronze Member
 
Join Date: Jun 2006
Location: Long Island, NY
Posts: 1,910
Quote:
Originally Posted by Wet_Boots View Post
only a low-rent piker puts power wires inside of poly pipe *cough*
But you've heard of it being done.
Reply With Quote
  #16  
Old 08-16-2011, 06:18 AM
AI Inc's Avatar
AI Inc AI Inc is online now
LawnSite Fanatic
 
Join Date: Dec 2007
Location: Southern NH
Posts: 21,642
Quote:
Originally Posted by WalkGood View Post
How deep do you guys get the pvc pipe via the puller?
by law supposed to be 12"
__________________
Reply With Quote
  #17  
Old 08-16-2011, 01:31 PM
Mdirrigation Mdirrigation is offline
LawnSite Bronze Member
 
Join Date: Dec 2003
Location: Maryland
Posts: 1,405
Quote:
Originally Posted by WalkGood View Post
How deep do you guys get the pvc pipe via the puller?
depends on the blade , anywhere from 8 inches to 22 inches .
Reply With Quote
  #18  
Old 08-16-2011, 05:27 PM
greenmonster304's Avatar
greenmonster304 greenmonster304 is offline
LawnSite Silver Member
 
Join Date: Jul 2007
Location: You Know
Posts: 2,453
Quote:
Originally Posted by WalkGood View Post
How deep do you guys get the pvc pipe via the puller?
I have a 20" blade you could borrow if you want to take a trip east to the fabulous hamptons.
Posted via Mobile Device
Reply With Quote
  #19  
Old 08-16-2011, 05:51 PM
CAPT Stream Rotar's Avatar
CAPT Stream Rotar CAPT Stream Rotar is offline
LawnSite Fanatic
 
Join Date: Apr 2007
Location: Cape Cod, Ma
Posts: 5,481
I hate those big blades...

Greenmonstah- its mostly sand there isn't it?
Reply With Quote
  #20  
Old 08-16-2011, 06:16 PM
irritation's Avatar
irritation irritation is offline
LawnSite Silver Member
 
Join Date: Jul 2006
Location: Indianapolis, IN
Posts: 2,577
I have a 36" blade that came with my DW 350SX. Same mounting holes as a 410 or even a 250. I never tried to use it, way too much blade for those machines.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:07 AM.

Page generated in 0.09379 seconds with 8 queries