Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-04-2011, 04:12 PM
Ramairfreak98ss Ramairfreak98ss is offline
LawnSite Silver Member
 
Join Date: Aug 2005
Location: Burlington County, NJ
Posts: 2,212
11hp honda SHARK pressure washer, what part is this?

Look at the photos of the "Legacy" brand pump, apparently the pressure regulator/Unloader is missing, so as soon as you hook the hose up, water shoots out of the 3/4" threaded hole up top.

Water also comes out of the injection inlet on the far right where the 3/8" clear vinyl tubing would hook up to a detergent bottle but slowly, like a steady flow, minimal pressure like your tap on low.

http://www.watercannon.com/p-1795-gp...wez-start.aspx

Is this what i need for here? theres like 30 different ones, im assuming its a standard 3/8" diameter that will thread into the pumps 3/4" threaded opening?

Oh, i know in the top port above the garden hose inlet, i need a threaded coupler to attach a female quick connect to it. I'd guess my only problem is finding out what unloader to thread into the top port so were up in working condition...
Attached Images
     
__________________
Ford Trucks, Simplicity machines, John Deeres, Ferris mowers, Stihl/Echo/Redmax handheld equip. lots of trailers
Reply With Quote
  #2  
Old 09-06-2011, 04:16 PM
Ramairfreak98ss Ramairfreak98ss is offline
LawnSite Silver Member
 
Join Date: Aug 2005
Location: Burlington County, NJ
Posts: 2,212
36 views no body has any ideas what part im looking at? I think its just the unloader i need to screw into the top and add the female quick connect onto the front of the pump for the high pressure hose right?
Reply With Quote
  #3  
Old 09-06-2011, 09:34 PM
vladis vladis is offline
LawnSite Member
 
Join Date: Aug 2011
Location: Fort Myers , FL
Posts: 2
I think you have unloader buid into pump head, with some missing
parts .( spring on tap and hp outlet ) .Tray search by pump model
for parts.
on another side of the pump is upstream injector ( runs chems thru the pump). Remove, plug port and use downstream injector .

Vladis.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:02 AM.

Page generated in 0.06255 seconds with 8 queries