Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 10-23-2011, 10:55 PM
facework84 facework84 is offline
LawnSite Member
 
Join Date: Sep 2011
Location: Upstate SC
Posts: 29
thinking of buying a used scag sw48. what to look at?

Hello,
I have no mechanical background. This was my first year in lawn care, and I started with an old Murray mower that I spent way more in repairs on, than what I paid for it. So i'm slightly worried about buying another used mower.

Its an older mower, it is clean but is sort of high on hours and has had a lot of parts replaced. Should I just take it to the dealer and pay them to inspect it for me?
Reply With Quote
  #2  
Old 10-24-2011, 12:53 PM
tarradane tarradane is offline
LawnSite Member
 
Join Date: Apr 2010
Location: vero beach.fl
Posts: 5
used scag

I have a few Scags, 2 wb and 2 zero turn riders. I assume you don't have a lot of lawns yet cause your just starting out. Any old mower is going to need parts and not be as reliable. I would run it and see how easily it starts, listen for any bearing noise in the blade spindles. Does it have enough power or burn,leak oil, etc. Does it have an electric blade clutch? They run about $ 300 when they fail. Also is it belt driven or hydro ( hydro parts are real expensive) Just make sure you get a good price and be prepared to have to replace parts occasionally.
Reply With Quote
  #3  
Old 10-25-2011, 05:20 PM
weapons of grass destruction's Avatar
weapons of grass destruction weapons of grass destruction is offline
LawnSite Member
 
Join Date: Feb 2011
Location: Palm Bay FL
Posts: 226
If you know how to do a compression test do that.
I would see about taking it to a dealer.
oil leaks and turn blades on and see how it sounds as far as spindle bearings.
__________________
A wise man sees trouble come and hides himself.
Proverbs
Reply With Quote
  #4  
Old 10-26-2011, 06:14 PM
facework84 facework84 is offline
LawnSite Member
 
Join Date: Sep 2011
Location: Upstate SC
Posts: 29
thanx for the replies. if i buy i will let you know how it goes
-Antoni
Reply With Quote
  #5  
Old 10-26-2011, 06:17 PM
borwicks's Avatar
borwicks borwicks is offline
LawnSite Senior Member
 
Join Date: Dec 2007
Location: Council bluffs, IA
Posts: 615
lots of parts replaced is good. High hours isnt bad if it was maintained and the price is right. engine, pumps and wheel motors $$$$ if you dont have any mechanical skills or know nothing how spindles sound, how to check compression. i would ask if you could take it to a dealer or someone that knows how to inspect unit.
__________________
WWW.borwicks.com You cant control people and weather but you can be tolerant and respectful.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:32 AM.

Page generated in 0.07141 seconds with 7 queries