Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 11-30-2011, 10:40 PM
MXHalofan MXHalofan is online now
LawnSite Member
 
Join Date: Jan 2008
Location: Kansas City MO
Posts: 84
Echo PB 620 should I richen up after removing the screen and some of the baffle?

Sorry if this has been discussed recently, I searched and read for quite a while and decided to post.

I removed the muffler off my champion of leafs, cleaned the port, then removed the screen from the muffler and ported the muffler some. You folks think I'll need to richen up the high speed adjuster?

Also where should my compression be, checked in at 100 psi, seemed low but I'm used to working on chainsaws.

Figuring I can probably tell if I'm lean by ear, but thought I'd ask around. The RPM range is a lot lower than my chainsaws I think. Anyone know the RPM it should be running at wide open?

Sure sound better and throttle response was better for the brief test tonight. Can't wait to open'er up tomo and beat on some leafs.
Reply With Quote
  #2  
Old 12-03-2011, 11:52 AM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,027
100 psi is pretty low. You may want to put a smaller diameter tube on your discharge to increase blower velocity.
Posted via Mobile Device
Reply With Quote
  #3  
Old 12-03-2011, 06:43 PM
ed2hess's Avatar
ed2hess ed2hess is offline
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,781
Adjust it by ear. Regardless of what you run that unit is going to wear out the crank bearing so keep an eye on those. And obviously when you replace them replace the needle bearing on the piston end.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:18 AM.

Page generated in 0.06232 seconds with 7 queries