|
#1
|
||||
|
||||
|
new toy
we finally decided to bite the bullet and upgrade from a scott's grass seed spreader for our salting applications to a snowex spreader
the dealer did the install then once it was home i went to town giving it a good fluid filming i also took some time to add some safety into the spreader
__________________
only serious soldiers need apply--> http://www.lawnsite.com/group.php?groupid=53 show your support --> http://www.facebook.com/pages/Fluid-Film/310621231055 http://fluid-film.ning.com/ |
|
#2
|
||||
|
||||
|
after the reflective tape was set it was time for more fluid film
i also was able to use the brand new extension wand for the ff can to get inside the square tubing on the spreader frame. i wouldn't have been able to get into those spaces without the hose.,, inside the funnel part of the hopper is a bare metal sleeve. def made sure to get that sprayed good, can't have it rusting on me had to modify the hitch slightly to fit our setup. once the cuts were made and holes were drilled it was time for more ff
__________________
only serious soldiers need apply--> http://www.lawnsite.com/group.php?groupid=53 show your support --> http://www.facebook.com/pages/Fluid-Film/310621231055 http://fluid-film.ning.com/ |
|
#3
|
||||
|
||||
|
Well alllllllllllllllll righty then!!!!
The Commander would be proud!!!
__________________
Lefet Enterprises LLC |
|
#4
|
||||
|
||||
|
Oh yeah! And congratulations on the new toy!!
__________________
Lefet Enterprises LLC |
|
#5
|
||||
|
||||
|
ff the hitch, frame and hardware once again to make sure i didn't miss any spots
__________________
only serious soldiers need apply--> http://www.lawnsite.com/group.php?groupid=53 show your support --> http://www.facebook.com/pages/Fluid-Film/310621231055 http://fluid-film.ning.com/ |
|
#6
|
||||
|
||||
|
i had an old ratchet strap where the ratchet handle was bent, figured this was a good job for it cause i wont care if it gets beat up even more
after it was strapped in it was time to test it out the last 2 pics are just for you joy oh and you too dano![]() drinkup:
__________________
only serious soldiers need apply--> http://www.lawnsite.com/group.php?groupid=53 show your support --> http://www.facebook.com/pages/Fluid-Film/310621231055 http://fluid-film.ning.com/ |
|
#7
|
||||
|
||||
|
Quote:
thank you sir!
__________________
only serious soldiers need apply--> http://www.lawnsite.com/group.php?groupid=53 show your support --> http://www.facebook.com/pages/Fluid-Film/310621231055 http://fluid-film.ning.com/ |
|
#8
|
||||
|
||||
|
Quite welcome! By the way, whose your photographer??? You sure do keep them busy!!
__________________
Lefet Enterprises LLC |
|
#9
|
||||
|
||||
|
nice, and just noticed that "someone" in your family loves a few christmas decorations!!!!wow is all i can say.
__________________
Man, it smells like sheet, do you smell that!!
|
|
#10
|
||||
|
||||
|
Nice pics Skynyrd! Hey I really like that sweatshirt!
__________________
Bill Depierro Depierro Lawns Inc. 29 years old 11 years experience www.standforstrength.com
|
![]() |
| Bookmarks |
«
Previous Thread
|
Next Thread
»
| Thread Tools | |
| Display Modes | |
|
|




the dealer did the install then once it was home i went to town giving it a good fluid filming
i also took some time to add some safety into the spreader

i also was able to use the brand new extension wand for the ff can to get inside the square tubing on the spreader frame. i wouldn't have been able to get into those spaces without the hose.,, inside the funnel part of the hopper is a bare metal sleeve. def made sure to get that sprayed good, can't have it rusting on me
had to modify the hitch slightly to fit our setup. once the cuts were made and holes were drilled it was time for more ff
after it was strapped in it was time to test it out
oh and you too dano

Man, it smells like sheet, do you smell that!!






Linear Mode
