The Green Industry's Resource Center

cutbetterthanyou · #1 10-10-2011, 05:45 PM

How do you put a link to another thread in a thread you are starting? Or, reuse a picture you have already used on here?

cutbetterthanyou · #2 10-10-2011, 08:26 PM

Come on guys does no one else know? Or is it somewhere right in front of me, and i just can't find out how?

fireman gus · #3 10-10-2011, 08:38 PM

Quote:

Originally Posted by cutbetterthanyou

How do you put a link to another thread in a thread you are starting? Or, reuse a picture you have already used on here?

Is this what you are talking about? If so just hit the quote box.

cutbetterthanyou · #4 10-11-2011, 08:16 AM

No a link to a completly different thread altogether. One where i could put it in a post like this, you click on it, and it takes you to a old thread, website, you tube, etc.

TNGrassCutter · #5 10-11-2011, 08:36 AM

Quote:

Originally Posted by cutbetterthanyou

No a link to a completly different thread altogether. One where i could put it in a post like this, you click on it, and it takes you to a old thread, website, you tube, etc.

Get that site or thread on your browser, right click the line where it starts with WWW., then click copy, go to new thread, right click where you would type, click paste.
Posted via Mobile Device

Richard Martin · #6 10-11-2011, 10:23 AM

To reuse a picture is easy.

You need to know a little vBulletin code to do it.

Go to the picture you want to reuse. Right click on it. Go to the bottom of the menu box that opens and click on Properties.

You'll see a line that says Address (URL):

Copy the complete address that appears. The address may be more than 2 lines long. When you start your highlight start at the top and drag all of the way to the bottom of the address.

Now go back to the message that you want the image to appear in. This is where you need the vBulletin code.

Where the cursor is flashing type [IMG]PASTE THE ADDRESS YOU COPIED HERE[/IMG

You need to put the last ] bracket behind the IMG. I only left it off so you could see the code that you need to write. The two brackets that you need are next to the P on your keyboard.

Richard Martin · #7 10-11-2011, 10:30 AM

Here is a list of all of the current vBulletin codes.

Remember, the command always looks like this: [COMMAND]VARIABLE[/COMMAND] with the variable in between the opening and closing command. The slash / is critical on the closing command. It won't work without it.

https://www.vbulletin.com/forum/misc.php?do=bbcode