Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-02-2012, 08:27 PM
FoghornLeghorn FoghornLeghorn is online now
LawnSite Senior Member
 
Join Date: Feb 2010
Location: Austin, TX
Posts: 513
Pricing fence cleaning. By the linear foot, or square foot?

Guys, I'd like your experience with computing a bid. Please, pardon my relative ignorance about pressure washing, but I recently got a client who desires to have several parks pressure washed.

How many linear feet of 6.5 foot wood fence can an average guy pressure wash per hour? I have a neighborhood with several thousand feet of wood fencing that needs to be pressure washed and don't know the first thing about how to price it.

I'll be renting a 500 gal water trailer and a skid mounted/truck bed hot water pressure washer.

Thanks, guys.
Reply With Quote
  #2  
Old 01-03-2012, 01:16 PM
JCinNJ's Avatar
JCinNJ JCinNJ is offline
LawnSite Member
 
Join Date: Feb 2010
Location: Egg Harbor TWP, NJ
Posts: 159
you should not use pressure to clean a wood fence, you will leave marks. Do some research and find some chems that will get the job done for you w/o pressure. try www.ptstate.com
__________________
JC Power Wash, Soft Wash & Roof Cleaning LLC
Providing Power Washing, Soft Washing & Roof Cleaning Services in NJ
609-412-3033
Reply With Quote
  #3  
Old 01-07-2012, 08:21 AM
Mike B.'s Avatar
Mike B. Mike B. is offline
LawnSite Member
 
Join Date: Aug 2010
Location: Saint Augustine FL
Posts: 19
With out seeing how dirty the fence is and your experience cleaning wood, I would guess 100-140 lin ft a hour. Hot water is not needed to clean wood. Envirospec has a good powdered wood cleaner, I think it's called restore. As for pricing, I am in FL and prices are very low. Good luck
__________________
Mike Barrett
Barrett's Pressure Cleaning
Saint Augustine, FL 32092
904-819-0090
www.barrettspressurecleaning.com
Pressure washing Saint Augustine
Roof cleaning Saint Augustine
Reply With Quote
  #4  
Old 01-10-2012, 09:57 PM
Pressure Washing Cleve Pressure Washing Cleve is offline
LawnSite Member
 
Join Date: Mar 2011
Location: Cleveland Ohio
Posts: 71
I base my estimates on time and not square footage. Figure out how long it will take, then how much you need to make per hour and there's your price.
__________________
ACE PAINTING
TOM BUCZAK
216-323-0552
Reply With Quote
  #5  
Old 01-17-2012, 08:43 AM
Everett Abrams's Avatar
Everett Abrams Everett Abrams is offline
LawnSite Member
 
Join Date: Jul 2011
Location: Shamong, NJ
Posts: 30
Foghorn,

Sorry I didn't see this before now. Hot water is not used on wood as it causes damage. When performing work on a fence make sure you use a cleaner or stripper to minimize the pressure needed, as alluded to above, to prevent scarring and to leave a more consistent result. Knotty cedar stockade fencing will turn out VERY blotchy if you do not do this right. In regards to pricing, especially for someone new it is best to work by linear or square footage. A job that an experienced contractor with the best, most efficient equipment may take 10 hours on a job where someone else may take 15 hours for the same job. If you both charge at $100/hr. guess who is going to get the job every time? After getting experience you will gain knowledge on time though. In regards to square footage I am assuming you are talking about 6x8 sections of fence. This is 48/sq.ft. per side or 96 sq.ft. per section. Include the post and call it 50 & 100. If it is stockade fencing and you charge $.50/sq.ft. that is $50/section. If it is Board-on-Board fencing(much more time consuming) and you charge $1/sq.ft that is $100 per section. As stated above do the research on posts from this and other bulletin boards and it will help. I hope I have been helpful and contact me if you need further assistance. Good luck with the job.
__________________
Everett Abrams
DECK RESTORATION PLUS
866-440-DECK(3325)
Deck Restoration Plus Website
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:57 AM.

Page generated in 0.08246 seconds with 7 queries