Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-14-2012, 09:37 PM
ohiododge ohiododge is offline
LawnSite Member
 
Join Date: Jan 2012
Location: Edison, Ohio
Posts: 4
Bobcat

Hello, Well 2 questions for the group. 1. What are the specs for the 5 screws that hold the recoil starter cover on the 15hp kohler? PO lost all of them!
2. Rebuilt the peerless trans as the input needle bearings were toast, Add the benotite grease before putting halves together or add it after? 700 series trans.
Reply With Quote
  #2  
Old 01-16-2012, 09:11 PM
ohiododge ohiododge is offline
LawnSite Member
 
Join Date: Jan 2012
Location: Edison, Ohio
Posts: 4
Well seems as I didn't get any input here is the answers. Screws are a 10-32 and fill the case up first then clean area around seal and use loctite gasket stuff. All good just rebuilt my peerless and works great. Better than 200.00 dollar new one.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:26 AM.

Page generated in 0.05301 seconds with 7 queries