Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 10-05-2013, 09:18 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
Couple cheap trucks/parts/etc

Thinking of parting out a couple trucks that aren't selling as a whole. We are a landscape company not truck dealer so bear with me if I'm not up on the lingo

- Dt466 engine out of international loadstar. 105,000 miles. New longblock at 80,000 and turned up a little (old owner said 275hp) $2900

- Eaton 5 spd manual trans from same international works great L-1-2-3-4 $500

- Front bumper from international loadstar with no rust and no dents painted black $100

- 10ft asphault dump body with pto hoist that works flawlessly $2000 you pull it

- 20,000 lb 2spd rear axle with 22.5 fresh re-treads $1000

- fiberglass flip hood $300 good shape with aluminum grill

- anything else on a '78 loadstar just tell me what you need and what it's worth but need the engine or dump body sold before we can justify really tearing it down. This is a running, driving truck titled in my name and would just as soon sell the whole thing


Next truck '96 ford f 350 12ft dumping stake, 4x4, 460efi, auto trans, manual transfer case, electric dump, hiniker plow frame

Hiniker frame mount - $250

- Front axle dana 60 4.10's - $1000

- Front driveshaft - $50

- transfer case - $350

- Transmission - $450 makes a noise in 1st and reverse so assume needs rebuild

- 460 with computer and all accessories - $1500 runs great

- Rear axle dana 80 4.10's limited slip dually - $600 hub to hub

- 12ft stake with rust but solid frame and wood floor - $500

- Electric hoist with controller, reservoir, pump, ram, etc but rusty scissor hoist - $300

- doors - manual windows, towing mirrors, no rust or very little at most, white $200 each

- hood in good shape but one little spot of rust on the lip $300 white

- all six steel wheels and good 80% tires 235-80-16 or something like that $750 I can throw in the front spacers if you're doing a dually swap. These i could sell any time since we have old wheels and tires to throw on.

- Anything else just ask. This is another one I would prefer to sell whole for much cheaper than the sum of the parts but it needs to be towed. We burned up a belt starting it to move it at the lot so we decided to just push it and broke the steering shaft trying to turn without the engine running. I have the clear title in my name


Third truck 1994 dodge ram 2500 4x4 reg cab, auto trans, manual transfer case, 360 gas, fisher mm1 7.5ft plow with pto pump.

- Engine 80,000 miles with all accessories and computer $700

- Trans seems solid $500

- Transfer case $350

- Dana 60 front axle with 4.10's and cad $950

- dana 60 or 70 rear axle with 4.10's - $500

- mm1 plow frame $250

- fisher pump and controls $650 works flawlessly

- plow has rust through up top from sitting on it's face but very solid frame $400

- plow/pump/frame/etc $1200 works flawlessly

- hood $200

- anything else go for it

Truck runs and drives great and plow works flawlessly but the frame looks thin out back and I doubt it would pass inspection. Comes with wood flatbed if bought as a whole. Clear title in my name

Chip 484-880-068four
Posted via Mobile Device
Reply With Quote
  #2  
Old 10-07-2013, 06:12 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
Bump - ford is spoken for as of now
Reply With Quote
  #3  
Old 10-10-2013, 06:17 PM
Miller Time's Avatar
Miller Time Miller Time is offline
LawnSite Member
 
Join Date: Oct 2010
Location: Baltimore Md.
Posts: 188
What u want for dodge? Can u send me pics? In md and will travel if cheap enough. I will pm with my cell and email

matt
Posted via Mobile Device
Reply With Quote
  #4  
Old 10-11-2013, 09:02 AM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
You can have the whole thing for $1850 - it's a lot easier for me not to have to part it out. It will easily drive itself up onto your trailer but I don't think I'd drive it home on a major highway. There are pictures on the craigslist ad that show the rust. Comes with stock wheels and tires.
http://philadelphia.craigslist.org/cto/4111908698.html
Reply With Quote
  #5  
Old 10-30-2013, 01:35 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
bump................
Reply With Quote
  #6  
Old 01-21-2014, 03:14 PM
mag360's Avatar
mag360 mag360 is offline
LawnSite Silver Member
 
Join Date: Jan 2003
Location: Southeast Pa
Posts: 2,434
Zzzzzzzzzzzzzz
Posted via Mobile Device
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:49 PM.

Page generated in 0.07549 seconds with 9 queries