Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 03-23-2012, 11:24 PM
JCLawn and more's Avatar
JCLawn and more JCLawn and more is online now
LawnSite Platinum Member
 
Join Date: Sep 2009
Location: MI
Posts: 4,879
Quote:
Originally Posted by bubba827 View Post
sweeet i will try it first thing tomorrow....after i fix the pump will i have to prime pump and if so can I do this on the bench?
The pump should self prime. What you do is when you put it back together jack that side of the mower up and rock the handles back and forth with the engine running until you get full hydro pressure. They have a priming pump in them.
Reply With Quote
  #12  
Old 03-23-2012, 11:29 PM
JCLawn and more's Avatar
JCLawn and more JCLawn and more is online now
LawnSite Platinum Member
 
Join Date: Sep 2009
Location: MI
Posts: 4,879
you have a BDP-10A-310 hydro gear pump. I am looking for a diagram for it.

Last edited by JCLawn and more; 03-23-2012 at 11:34 PM.
Reply With Quote
  #13  
Old 03-23-2012, 11:40 PM
JCLawn and more's Avatar
JCLawn and more JCLawn and more is online now
LawnSite Platinum Member
 
Join Date: Sep 2009
Location: MI
Posts: 4,879
ok here is the pump break down. http://www.m-and-d.com/pdfs/hydrogear/BDP-10A.pdf Sounds like you need part number 85 on there. I had to dig the web for this page haha. Also here is where I found the other diagram http://www.the-mower-shop-inc.com/223-227_2005.aspx Here is where I found the pump diagram http://www.m-and-d.com/Hydro-Gear_parts.html and your pump is BDP-10A which I just google the grasshopper part number for the pump and it popped up.
Reply With Quote
  #14  
Old 03-24-2012, 01:51 AM
bubba827 bubba827 is offline
LawnSite Member
 
Join Date: Mar 2012
Posts: 14
thanks again
Reply With Quote
  #15  
Old 03-24-2012, 07:05 PM
bubba827 bubba827 is offline
LawnSite Member
 
Join Date: Mar 2012
Posts: 14
hey just an update JC.......everything went great today took pump off and replaced o rings and seals everything back working ......only thing I noticed was when i started off going forward at full throttle it wanted to pull just a tiny bit to the left...just wondering if maybe the left pump was just a little weaker now than before? there was no pull before I took pump off, it tracked straight. I am not too worried about it because it is every so slight and i can adjust it if i need to
Reply With Quote
  #16  
Old 03-24-2012, 07:37 PM
JCLawn and more's Avatar
JCLawn and more JCLawn and more is online now
LawnSite Platinum Member
 
Join Date: Sep 2009
Location: MI
Posts: 4,879
There should be adjustments on your hand lever linkage where it fastens to the pump. If you have it adjusted to far one way then it will pull. Look at your other side and compare the settings.
Posted via Mobile Device
Reply With Quote
  #17  
Old 03-24-2012, 08:30 PM
bubba827 bubba827 is offline
LawnSite Member
 
Join Date: Mar 2012
Posts: 14
yea thanks gona adjust it tomorrow
Reply With Quote
  #18  
Old 03-24-2012, 09:08 PM
JCLawn and more's Avatar
JCLawn and more JCLawn and more is online now
LawnSite Platinum Member
 
Join Date: Sep 2009
Location: MI
Posts: 4,879
So did the diagrams help?
Posted via Mobile Device
Reply With Quote
  #19  
Old 03-24-2012, 10:06 PM
bubba827 bubba827 is offline
LawnSite Member
 
Join Date: Mar 2012
Posts: 14
oh yeaaaaaaaaaaa a life saver for sure......prob saved me between 2 to 3 hundred bucks,,,,thanks again
Reply With Quote
  #20  
Old 06-23-2012, 12:06 PM
bubba827 bubba827 is offline
LawnSite Member
 
Join Date: Mar 2012
Posts: 14
HELPPP had to replace same seal in other pump and after i did that and put pump back on the whell does not turn....forward or reverse....i jacked mower up and move handle back and forth still nothing.....any idea whas wrong....i got 2 yards to cut before sundown...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:05 PM.

Page generated in 0.07744 seconds with 7 queries