Lowering pH of water to apply an organic fungicide
May seem like a simple question guys, but I have not had to do this before.
My water supply is almost dead neutral at 7.2 pH. Seems to work ok for my conventional weed control products (maybe a touch high but the control is good so can't complain).
However, I am going to apply some 1-2-3 NPP from ICT Organics to combat a fungal problem in a few resi lawns. Specified acidity of water to use with that product is 5.0-5.5 or slightly acid.
How do I lower the pH of my water for these apps? Is it as simple as adding some household vinegar at a set amount to get the desired pH?
7x14 Stealth SE Enclosed with 48" side ramp
2013 Gravely Pro Turn 260 with Kohler 26.5 EFI
08 Toro Z400 48" deck, 21HP Kaw with EZ Vac twin bag
09 Exmark Turf Tracer HP 36"
21" Toro SR4 Super Recycler
Stihl KM90 Kombi w/ straight shaft trimmer & tiller heads
2 Husqvarna 125B Blowers
Turfco XT5 Aerator
Turfco LS-22 Overseeder
EcoLawn 200 Applicator
I can do all things through Him who gives me strength.