Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 05-03-2012, 12:34 AM
Manager1 Manager1 is offline
LawnSite Member
 
Join Date: Jan 2012
Location: CHATTANOOGA,TN
Posts: 10
Lawnboy trans swap

I have 10323 that i would like to speed up. What parts will i need to do this and from what model? Any help would be appreciated. Thanks
Posted via Mobile Device
Reply With Quote
  #2  
Old 05-03-2012, 06:31 AM
lawnboy dan lawnboy dan is offline
LawnSite Gold Member
 
Join Date: Oct 2005
Location: north florida
Posts: 3,419
anyone who thinks this mower is too slow is nuts. there is no kit to speed it up. use your imagination and invent something yourself
Reply With Quote
  #3  
Old 05-03-2012, 07:02 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,002
Don't know much about lawnboy.....but you might be able to use the oldest speedup trick in the book.....larger drive tires.....
Posted via Mobile Device
Reply With Quote
  #4  
Old 05-09-2012, 12:03 AM
Manager1 Manager1 is offline
LawnSite Member
 
Join Date: Jan 2012
Location: CHATTANOOGA,TN
Posts: 10
Nevermind i found that you can take gears out if a 10552 and put them in the 10323back and it will be quicker.
Posted via Mobile Device
Reply With Quote
  #5  
Old 05-09-2012, 09:25 AM
dutch1's Avatar
dutch1 dutch1 is offline
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,133
Unless part numbers have been superceded, you will also need the output shaft from the EasyStride transmission as well--at least the part numbers are different. If you're going to use new parts, the change over isn't cost effective as the output shaft for the EasyStride is $70 and change.

A simpler solution would be a smaller pulley on the transmission--how much smaller would require some pencil pushing.
Reply With Quote
  #6  
Old 05-09-2012, 10:58 AM
Manager1 Manager1 is offline
LawnSite Member
 
Join Date: Jan 2012
Location: CHATTANOOGA,TN
Posts: 10
Thanks dutch
Posted via Mobile Device
Reply With Quote
  #7  
Old 05-10-2012, 12:00 AM
bare spot's Avatar
bare spot bare spot is offline
LawnSite Bronze Member
 
Join Date: Apr 2007
Location: eastern,pa.
Posts: 1,227
Quote:
Originally Posted by Manager1 View Post
Nevermind i found that you can take gears out if a 10552 and put them in the 10323back and it will be quicker.
Posted via Mobile Device
did this a few yrs ago after reading bout it to a 10323. don't remember the part numbers but recollect it involved switching out 2 gears. worked out good.
Reply With Quote
  #8  
Old 05-10-2012, 08:31 AM
Manager1 Manager1 is offline
LawnSite Member
 
Join Date: Jan 2012
Location: CHATTANOOGA,TN
Posts: 10
Barespot the guy that told me this serviced over a 1000friendship lawnboys. He said it just the two gears. They are about 20the a peice. He didnt say anytbing aboit a output shaft.
Posted via Mobile Device
Reply With Quote
  #9  
Old 05-10-2012, 08:33 AM
Manager1 Manager1 is offline
LawnSite Member
 
Join Date: Jan 2012
Location: CHATTANOOGA,TN
Posts: 10
Posted via Mobile Device
Reply With Quote
  #10  
Old 05-10-2012, 08:53 AM
dutch1's Avatar
dutch1 dutch1 is offline
LawnSite Silver Member
 
Join Date: Dec 2004
Location: Jayhawk
Posts: 2,133
Manager, not only does the output shaft numbers differ but also the input gear. Check out LawnBoy's website. As I indicated before, it's possible that numbers have been superceded and that can be checked out at a LB dealer.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 04:41 AM.

Page generated in 0.08396 seconds with 7 queries