Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather


Reply
 
Thread Tools Display Modes
  #1  
Old 10-20-2010, 05:56 PM
thorntonadvantage thorntonadvantage is offline
LawnSite Member
 
Join Date: Sep 2007
Location: Atlanta, Georgia
Posts: 19
Issue with my RH Stander

I bought a 2009 RH Stander with a 52 inch deck. I love the mower, but I have an issue that I can't seem to solve. On flat surfaces the machine preforms great, but on slopes one side of the deck cuts deeper and causes a defined line in the turf. I would have the take my string trimmer to blend the line in or mow at a higher height. I'm in Georgia and I mainly cut Bermuda grass.
Reply With Quote
  #2  
Old 10-20-2010, 08:13 PM
grassman177's Avatar
grassman177 grassman177 is offline
LawnSite Fanatic
 
Join Date: Oct 2007
Location: leavenworth, kansas
Posts: 9,786
probably because of the narrow wheels vs the wider deck and if it is not tire pressure and unlevel deck, then i found on machines like this it was better to cut narrow on those hill areas and it does much better,

thoughts to help the best i could...........
__________________
all is fair in love and grass! Man, it smells like sheet, do you smell that!!
Reply With Quote
  #3  
Old 10-22-2010, 09:20 AM
WrightCommercial WrightCommercial is offline
Sponsor
 
Join Date: Apr 2008
Location: Frederick, MD
Posts: 507
thorntonadvantage,

Check the lift system for any side to side play, a quick way is to grab the stationary bar and see if you have movement when pulling the bar to either side of the mower. If there is movement check the pivot points in the lift system.

Best Regards,
Wright Mfg. Service Dept.
Reply With Quote
  #4  
Old 06-15-2012, 01:20 PM
ernst.mp ernst.mp is offline
LawnSite Member
 
Join Date: Jun 2012
Posts: 1
I was wondering if you had ever resolved your issue and how? I am having a problem with an older 61 inch stande cutting lower on the chute side when on a slight slope and really digging in on a hard turn on a slope or level.

Thanks
Reply With Quote
  #5  
Old 06-15-2012, 03:11 PM
WrightCommercial WrightCommercial is offline
Sponsor
 
Join Date: Apr 2008
Location: Frederick, MD
Posts: 507
ernst.mp,

Since the 61" fixed deck has no lift system this would be a different issue. Usually this is related to a run flat tire that has gone soft and when the mower is turning to the right or is the low side on a slope the tire gives and causes the front end to dip on that side. Also check the rear tire pressures to make sure they are the same, this can contribute but it is usually the caster tire that is the problem when it is related to the mower turning.

Best Regards
Wright Mfg.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump




Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:26 PM.

Page generated in 0.07483 seconds with 9 queries