Hydro-Gear Pump PG-1GCC-DY1X-XXXX

[lawnphysics]

Looking for a used hydro gear for a Scag Tiger Cub.

PG-1GCC-DY1X-XXXX

AND

BDP-10A-419

SCAG PART #42644

Buying a new one at this time is NOT an option. The mower will just have to sit for a couple months. If you have a used pump, or the internal guts let me know. I only really need the internal bearings/and or thrust kit. I am going to put new seals in as well.

I have done flushed the system. I know putting a used one on the mower is risky but I don't have a choice. I can run my walkbehind on all my jobs till I get the rider fixed so I may just have to wait till I save some money for a new one but thought I would see if anyone has anything out there.

[DaveWB]

Surpluscenter.com has the .62 inch^3 for $110 new each. I spent $500 rebuilding my hydro pumps, they didn't work, bought the 18cc pumps for $120 each and they work like a charm, a little bit of retro-fitting was required, like new fittings, but that might not be required for you since mine was originally 21cc and I had to get a 18cc since thats the biggest they have.