Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 05-20-2012, 06:40 PM
OKSooner's Avatar
OKSooner OKSooner is offline
LawnSite Member
 
Join Date: Feb 2007
Location: Oklahoma
Posts: 204
How to replace the parking brake equalizer on a 93 F250?

Tried posting this on F150online but no takers...

Y'know that little stamped steel doodad that connects the parking brake cable, coming from the parking brake pedal, to the two cables that each go to the brakes on each rear wheel?

Mine broke from metal fatigue. So I got a new one, fortunately, from my local dealer. It has three keyhole-shaped holes in it - one in the center, for the forward cable, and two holes on either end, one for each rear cable. It looks to me like it installs by slipping the cable stop for each cable thru the big portion of the keyhole shape, and then around to where the cable stop is bearing on the small part of the keyhole shape. You do this for each cable, forward and rear.

Of course, there's got to be a certain amount of slack in the lines. I tried doing it by pulling the parking brake pedal all the way up into the release position and then pulling the slack out of the rear cables. Obviously I'm still missing something.

If I have to pull off the rear brake drums and un-adjust the brakes to get mucho slack in the rear cables, how is this done? Any special brake tools required? Or is there some other way that doesn't involve messing with the brakes that I just don't know about?

Thanks in advance.
Reply With Quote
  #2  
Old 05-21-2012, 10:01 AM
ecurbthims ecurbthims is offline
LawnSite Senior Member
 
Join Date: Feb 2011
Location: sudbury ontario
Posts: 436
its been a long time since working on a ford as old as that , you might have to remove the drums ,but first completely back off and remove the adjuster nut and see if you can get the cables back together .
Reply With Quote
  #3  
Old 05-21-2012, 10:22 AM
whiffyspark whiffyspark is online now
LawnSite Fanatic
 
Join Date: Jul 2011
Location: Chesapeake beach
Posts: 5,248
You have to pull the cable out to get slack. I use wire cutters and lineman pliers and work it out
Posted via Mobile Device
Reply With Quote
  #4  
Old 05-22-2012, 12:47 AM
WPLE's Avatar
WPLE WPLE is offline
LawnSite Member
 
Join Date: Mar 2003
Location: Northeast MS
Posts: 153
Probably get some good info on powerstroke.org
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 02:07 AM.

Page generated in 0.06186 seconds with 7 queries