LandFakers 2012 Striping

[LandFakers]

Originally Posted by recycledsole

looks nice sir

Thanks. I wish I had lawns people would actually let me/ fertilize themselves. Most of my customers barely even water

[LandFakers]

Put some diamond plate on the front trailer tool box
Posted via Mobile Device

[LandFakers]

Whoops. Here it is


Posted via Mobile Device

[LandFakers]

Went out to aerate, oversees and fertilize today. Finally broke down and bought a commercial spreader... But even then I bought it on sale. Hahaha

[LandFakers]

Just one from today

[LandFakers]

Just a little job to clear all this debris and then plant some shrubs. Some good progress before it got dark. Only an hour in

[charmill26]

Nice work. But just so you know that is not a commercial spreader at all. You will get some use out of it but don't plan on it holding up. I started out with the same one a few years ago. Not trying to be negative at all just giving you a heads up

[LandFakers]

I believe It's listed on their website as a commercial spreader, but I could be wrong. I bought it because it was on sale. It is a linkage not a cable and overall I'm happy with it. I don't use it much so it should work out good for me. Thanks for the heads up though.
Posted via Mobile Device

[EarthWayJK]

Originally Posted by LandFakers

I believe It's listed on their website as a commercial spreader, but I could be wrong. I bought it because it was on sale. It is a linkage not a cable and overall I'm happy with it. I don't use it much so it should work out good for me. Thanks for the heads up though.
Posted via Mobile Device

That is our 2150 and is our Commercial 50# spreader I can assure you. It’s one our most popular model, but it’s not our professional unit – the C22HD. A suggestion before the unit gets too old, get some Fluid Film and spray the inside of all the tubing - especially the lower handles and frame thoroughly - to the point of running out the feet and at the axle on the lower handles to prevent rust. I suggest removing the bolt that holds the lower handle to the frame from each side and spray it in there – you get both parts at the same time. We put that tip in the manual, but I wanted to reinforce that message now.

If in the future you need parts consider getting the Stainless Steel versions - they have the same part number just with a -SS at the end. Keep in touch.
Jeff Kendall
Vice President, Sales & Marketing
Earthway Products, Inc.

[LandFakers]

Thanks for the tip Jeff. Will be sure to get some fluid film and do what you instructed ASAP
Posted via Mobile Device