Old 06-05-2012, 08:47 AM
Zohan Zohan is offline
LawnSite Member
Join Date: Mar 2011
Posts: 136
Bunch of fixtures not working

First time this has happened, and I dont think this is normal.
Did a project last summer with 53 fixtures. 10 Path and 43 Bullets. Was there yesterday to add 2 bullet fixtures to highlight newly installed fence posts, and when turning on system to check discovered approx. 15 or so fixtures are not working. Some of those fixtures are 1 complete zone in backyard of 6 fixtures. At first I thought maybe a landscaper cut the wire to that zone, but then realized that wire runs alongside wires to other zones.
Since i've never had this many fixtures out at once I have to ask is this common? Do you guys encounter this at all?
Looks like I need a bunch of mr16 and t3's.
Reply With Quote
Old 06-05-2012, 09:22 AM
GreenLight GreenLight is offline
LawnSite Senior Member
Join Date: Dec 2008
Location: Birmingham, Alabama
Posts: 460
One thing to be aware of that I discovered a few years ago after having some similar issues. Look very closely at the factory bulb you are receiving with your fixtures. Im going to go ahead and call out Hadco here. I appreciate a lot of things hadco does for me. They stand behind their product and never give me any grief about warranty issues or replacements and they are so tightly in bed with ewing that between the two of them they bend over backwards to please. That being said I have one major beef with them. They ship a 3000 Hour MR 16 with their standard bullet fixtures and a 2000 hour T3 with path lights. The T3 bulb they ship seems to vary, but for the most part it's pretty crappy. I have been in the process of raising cane to get them to upgrade to at least a 5000 hour MR16 and a 10000 T3 and I hope that it will be changed soon. I don't mind if they bump the price a few dollars, I just want better lamps in the fixtures.

Sorry to go astray a moment, long story short, if you are getting starter bulbs from the factory it's very hard to distinguish unless you look at the fine print on the bulb (if it has it) or the bulb box. Those crappy bulbs were failing early and spiking voltage so much I was losing a lot during the first year. I finally sucked it up and started chunking the starter bulbs and installing really good lamps. It's made a lot of difference. I hate the wasteful aspect of it but I like doing business with Hadco aside from that one beef.
Reply With Quote
Old 06-05-2012, 09:47 AM
Classic Lighting's Avatar
Classic Lighting Classic Lighting is offline
LawnSite Senior Member
Join Date: Jul 2009
Posts: 466
Are these halogen or LED?
Check all connections for continuity.
Check voltage readings.
Reply With Quote
Old 06-05-2012, 10:05 AM
Zohan Zohan is offline
LawnSite Member
Join Date: Mar 2011
Posts: 136
Halogen...I have since converted to all Kichler led fixtures....but have to take care of this situation..
Reply With Quote
Old 06-05-2012, 07:02 PM
Lite4's Avatar
Lite4 Lite4 is offline
LawnSite Gold Member
Join Date: May 2007
Location: Indianapolis, IN
Posts: 3,079
If they are junk lamps, it could be you had a couple burn out which caused the rest on that circuit to spike causing premature burnout. It happens. It's either that or a cut wire, however I would lean toward it being a burnout. Easy to find out though.

Tim Ryan
Lite4 Outdoor Lighting
Reply With Quote
Old 06-05-2012, 10:33 PM
Zohan Zohan is offline
LawnSite Member
Join Date: Mar 2011
Posts: 136
The bulbs are the ones that come with the Vista fixtures.
I ordered a bunch of replacement bulbs today, when they come in I will be going back to replace and will find out the scoop...
Reply With Quote
Old 06-06-2012, 01:06 AM
S&MLL S&MLL is offline
LawnSite Senior Member
Join Date: Feb 2008
Location: Somerset County NJ
Posts: 755
Some t3 lamps are 2k hours. Some mr16s are 2.5k hours. We mostly install 5k hours mr16s and 10k hours t3,t5,921 lamps..... Reason being.... I hate mid season burnout on dusk till dawn clients
Reply With Quote
Old 06-07-2012, 03:30 AM
David Gretzmier David Gretzmier is offline
LawnSite Gold Member
Join Date: Mar 2001
Location: Fayetteville,AR
Posts: 3,645
a bulb that is rated at 5000 hours receives that UL rating thusly-feel free to look this up and check me-

take 100 bulbs, set the lab thermostat at 68 degrees and put them at the rated voltage 24/7 and wait for 1/2 of them to burn out. at that moment, you are awarded a bulb life rating.

and remember-no vibrations from lawn mowers, weed trimmers or hedge trimmers, blowers, no 100 degre temps or -5 degree temps. errant landscapers kicking the fixture is not allowed. this is a lab rating only.

so, a few of those 50 bulbs out of 100 will burn out at 100 hours, some at 1000, some at 2500, and so on. the same is true of 10,000 hour bulbs. it is not a minimum rating, it is an average.

so, we spot check any jobs we are near when installing at least every 3-4 months, and do a full bulb replacement every year. because if they burn them all night long, at 4400 hours of darkness here per year, even with 5000 hour bulbs, it would actually be normal for 16 out of 40 fixture job to be burned out in a year. we do volt to 10.5-11.5 and get a bit less burnout and do better than that, but still, bulbs do burn out.
Reply With Quote
Old 06-07-2012, 08:18 AM
Zohan Zohan is offline
LawnSite Member
Join Date: Mar 2011
Posts: 136
good info, thx
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Grand View Media
All times are GMT -4. The time now is 07:16 AM.

Page generated in 0.09092 seconds with 10 queries