Register free!


Reply
 
Thread Tools   Display Modes
  #1  
Old 06-20-2012, 01:26 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
Fun job this week

Working on a system at a commercial property right now. Here are some pictures.
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #2  
Old 06-20-2012, 01:27 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
New pro C controller. This is my first controller that I have installed...how did I do?
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #3  
Old 06-20-2012, 01:32 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
This one was a fun one. To the left you have a el with a 1/2" bushing in it. This goes to a popup. Next you have the T that goes straight down to the mainline. This must 90 a foot or 2 down and then go under the pavement. After than you have the rest of the lateral that goes to a bunch of popups. Well the lawncare guys must have been hitting it because there was no head there and a 4" popup would have stuck up 2" over grade. I could not lower it because of how the t was situated. So we had to improvise
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #4  
Old 06-20-2012, 01:34 AM
irritation's Avatar
irritation irritation is offline
LawnSite Silver Member
 
Join Date: Jul 2006
Location: Indianapolis, IN
Posts: 2,637
Not good.
1 - You used Hunter
2 - Not hardwired
3 - Did not remove old anchors
Reply With Quote
  #5  
Old 06-20-2012, 01:37 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
So here is what we did. 1/2" cutoff from the threaded el to another threaded el. Then over to another el, straight down to another el, and then over to a threaded el. then up with a 1/2" cutoff to a rainbird/hunter head. We did the best with what we had. It was plenty low...they will never run over it again.
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #6  
Old 06-20-2012, 01:39 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
BTW....1804 w/ hunter screens/nozzles. Cheapest combo.
Yes the glue/primer was messy. This was one of those days it didnt matter
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #7  
Old 06-20-2012, 01:41 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
Quote:
Originally Posted by irritation View Post
Not good.
1 - You used Hunter
2 - Not hardwired
3 - Did not remove old anchors
1. I replaced it with exactly what was there.
2. All I had to work with was an outlet. Was not about to try to hard wire it in anywhere. Plus at this location turning power off would have been difficult to say the least.
3. The old anchors were from a timer eons ago. Not from the one I took off.
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #8  
Old 06-20-2012, 01:43 AM
irritation's Avatar
irritation irritation is offline
LawnSite Silver Member
 
Join Date: Jul 2006
Location: Indianapolis, IN
Posts: 2,637
Stick with mowing.
Reply With Quote
  #9  
Old 06-20-2012, 01:49 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
Thanks. Know my work is not as good as yours but I've only been in this for 3 months or so and im only 18. Trying my best!!!
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
  #10  
Old 06-20-2012, 01:51 AM
Mikegyver Mikegyver is offline
LawnSite Bronze Member
 
Join Date: Jan 2010
Location: Longview TX
Posts: 1,803
How would you have done it better in the same amount of time and for the same cost with the materials on hand (several bins of fittings).
__________________
High end commercial, multi-family and residential lawn care, irrigation (LI and BPAT), and landscaping.
Mikegyver Pics Thread
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 10:05 PM.

Page generated in 0.07765 seconds with 8 queries