Reglue Fastrak seat

[bcalvary]

If anyone has successfully reglued a fastrak seat please tell me what adhesive you used and be specific as possible.

Thanks in advance,
Bob from Florida

[piston slapper]

Not sure what you're trying to glue...
I've used Liquid Nails to reglue the moded cushions back to the seat...
There's enough glue in a tube to stick a large cushion...
Posted via Mobile Device

[bcalvary]

Which one of the liquid nails did you use? The whole seat cover and cushion has separated from the plastic seat.

[piston slapper]

I just applied some on the cushion...and some on the seat...
Waited a minute or so ....and stuck them together...
Posted via Mobile Device

[bcalvary]

Thank you for the reply, but which one of the liuid nails did you use? Home projects, sub floor, heavy duty, etc.

[piston slapper]

Read the label....they should all work on plastic...
Posted via Mobile Device

[bcalvary]

Called the Liquid Nails lab technician who recommended LN-950 (Polyurethane)... can't buy it within 50 miles of where I live, however Crower Brothers would order it for me but I had to buy a 12ea case.
I decided to try the Loctite PL Premium Fast Grab Polyurethane construction adhesive. After applying adhesive and wrapping the seat with something like shrink wrap I will let set for a few days to set up (recommended 24 hours) . I always give extra time just in case and will update you with the results when I break the bonds. The seat cost $200 new.... I'm hoping this will get me down the road a few more years. It is 9 years old and the only thing I've done is replace the 3 spindle bearings.. seat is still in question??? Thank you for your help and I hope this will be of help to someone else. Again, I will update in a few days with results.

Thanks,
Bob from Florida

[bcalvary]

It's been 48 hours now so I took the wrappings off. I will say it "appears" the glue is holding. Only time will tell, I will update in a few days.

[piston slapper]

In another 48 hours...you may get to use that mower..
We got 9 inches of rain in the past 24 hours...

[bcalvary]

I'm happy to report the seat reglueing is a 100% success. It's as good as new. One word of caution..... if that glue touches something and dries... it "aint" comin off, so be careful. It's permanent!!!

I hope this helps someone else....