Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 08-23-2012, 09:41 AM
JBgreencontrol JBgreencontrol is offline
LawnSite Member
 
Join Date: Aug 2010
Location: South Florida
Posts: 4
Wright mower not cutting so great. Row of uncut grass

Hi guys,
When we got this 36" wright stander it was cutting great. We've had it for about 6 months now. It has 930 hours on it. I have noticed recently that it kept leaving a row of uncut grass right in the middle of the two blades. We took the blades to get sharpened, and tire pressures on tires are equal. What could be the problem? It leaves the uncut grass just about all the time when im going in a strait line.
Reply With Quote
  #2  
Old 08-23-2012, 10:30 AM
Darryl G Darryl G is offline
LawnSite Fanatic
 
Join Date: May 2001
Posts: 7,957
You might need new blades. The edge near the end tends to wear since it does most of the work and you get a rounded rather than a square edge, which in effect shortens the blade. Also make sure you keep the under side of the deck clean, since it will affect the air flow if it gets plugged up with crud.
Reply With Quote
  #3  
Old 08-23-2012, 02:32 PM
pugs pugs is offline
LawnSite Silver Member
 
Join Date: Jun 2006
Location: Southwest of Chicago
Posts: 2,709
Have you changed the spacers on the front wheels recently? The small Wrights really need the deck raked a bit. Make sure the front of the deck is lower than the rear of the deck. 1/8-1/4 inch lower should do.

Also compare the blades to a new set and see if they are long enough. Maybe they have been sharpened too many times.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 03:28 AM.

Page generated in 0.05816 seconds with 7 queries