km 110r timing

[potskie]

I've got a km 110r that I just replaced a valve in.

how do I go about setting the timing?

I noticed the timing gear has markings but the crank gear does not. My guess is have the piston at TDC then install the timing gear with the lobe and arrow pointed towards the crank shaft. But this is just a guess and I've got way too much effort involved so far to grenade the motor on a guess.
Posted via Mobile Device

[potskie]

My guess was correct. Found the Procedure for a 4-Mix BR600. Exact same except the cam lobe faces the opposite direction on the KM 110R.