buying a wheel motor, details inside

[birddseedd]

I need a wheel motor for my toro 628E (model 74240 sereal 220000378)

the toro part number is 1-523328

the manufacturer (parker hannifin) model number is TF0240US081AADD.

I can use other models of this wheel motor aswell, jsut post the parker model number off the end of it and i can tell if its compatable. might also be intereseted in a pump to go with it. been on the net all day lookiing for a used one. LS is my last stop before giving up.

thanks

mike

[GrasshoppersLLC]

Just have a local hydrolic shop rebuild it. Bout the same price as a used one but you will have all new stuff in it...

[birddseedd]

Originally Posted by GrasshoppersLLC

Just have a local hydrolic shop rebuild it. Bout the same price as a used one but you will have all new stuff in it...

waiting on an email now from a parker hannifin dealer to see about getting parts for it.

[GrasshoppersLLC]

If you can't get parts a hydro shop can I have a close friend that works at a hydro shop he's rebuilt pumps and wheel motors for me no prob.. Usually only cost about 3-350

[birddseedd]

Originally Posted by GrasshoppersLLC

If you can't get parts a hydro shop can I have a close friend that works at a hydro shop he's rebuilt pumps and wheel motors for me no prob.. Usually only cost about 3-350

tough part is I can get a new one for 320. if I can find q used or parts for less its worth getting. but for new I can wait till next year.

[GrasshoppersLLC]

For 320 you might as well go new.. 300 is cheap now for stuff.. I would be happy it's only 300

[birddseedd]

Originally Posted by GrasshoppersLLC

For 320 you might as well go new.. 300 is cheap now for stuff.. I would be happy it's only 300

ya. problem is that its not just the motor. woudl have to at best rebuild the pump. then cleaner to clean it all out. new fluid.

lookin at up twards 800 bucks. just isnt worth spending that at the end of hte season i dont think

[GrasshoppersLLC]

I just rebuilt pump in my one exmark.. Had to flush the entire system and lines.. New fluid and filter.. Luckily it was just the pump only costed me about 400 for rebuild and fluid

[DaveWB]

check out surpluscenter.com

[birddseedd]

Originally Posted by DaveWB

check out surpluscenter.com

thanks. they didnt have my exact one. but they had ones that were close. ill keep looking hopefully thell get one.