Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 09-22-2012, 04:44 PM
RigglePLC's Avatar
RigglePLC RigglePLC is offline
LawnSite Fanatic
 
Join Date: Jul 2006
Location: Grand Rapids MI
Posts: 9,090
Iron application

So...I tested iron solution sprayed on grass. I used Bonide ferrous sulfate containing 15 percent iron. I added 8 ounces to a quart of water--normally this would cover about a thousand sqft with my hand sprayer. Like last year, it did not dissolve completely, but left a bit of undissolved residue in the bottom of the sprayer; no problem.

I sprayed two 4-foot square areas, with about 18 inches of untreated grass between in the center behind the clump of tall fescue. I sprayed twice over on the left and once over on the right. It rained after about 8 hours, and the photos were taken after about 24 hours.

After 7 hours, a dark color was visible--a blackish stain or residue. Brown crabgrass in the area was stained distinctly black, (second photo). Dandelions were stained somewhat black also.
Attached Images
   
Reply With Quote
  #2  
Old 09-22-2012, 06:43 PM
vaacutabove vaacutabove is online now
LawnSite Senior Member
 
Join Date: Jul 2010
Location: forest va
Posts: 879
have you ever compared different iron products. I have been thinking about doing it my self but never have. I was going to use feromec and another one my rep had that was "the best" can't remember the name off the top of my head but to see if the color is better and last longer. hope you have some insight bc I can't seem to find the time.
Reply With Quote
  #3  
Old 09-22-2012, 07:18 PM
phillie's Avatar
phillie phillie is offline
LawnSite Senior Member
 
Join Date: Feb 2010
Location: indianapolis, in
Posts: 845
Was the dandelion sprayed with a w/c? Is it curling up or just black? Also, it turned dead or dying crabgrass brown?
Reply With Quote
  #4  
Old 09-22-2012, 09:16 PM
RigglePLC's Avatar
RigglePLC RigglePLC is offline
LawnSite Fanatic
 
Join Date: Jul 2006
Location: Grand Rapids MI
Posts: 9,090
I have no compared iron products. I don't have any additional iron product on hand. Sorry.
I noticed the crabgrass was half dead due to 41 degrees temp we had last week. The iron really stained the brownish leaves black. On green grass leaves the black stain does not show as much...maybe it is just as much stain.

I am not sure if the dandelions had weed control on them--probably so--as I spot sprayed weeds on this lawn last week.
Reply With Quote
  #5  
Old 09-23-2012, 09:04 AM
Smallaxe Smallaxe is offline
LawnSite Fanatic
 
Join Date: May 2007
Location: Central Wisconsin
Posts: 9,793
The stain is just a side effect from physical contact,,, the real question is will it be taken up by the plant and be noticable improved color...
__________________
*
Now that I know that clay's texture(platelets) has nothing to do with water infiltration, percolation, or drainage
,,, I wonder what does...
*
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 12:36 AM.

Page generated in 0.06843 seconds with 10 queries