Register free!
Search
 
     

Click for Weather
Reply
 
Thread Tools Display Modes
  #21  
Old 09-04-2003, 11:47 AM
Planet Landscaping's Avatar
Planet Landscaping Planet Landscaping is offline
LawnSite Senior Member
 
Join Date: Oct 2002
Location: Oxford ct.
Posts: 607
Bought the 3" kawi semi-trash pump off e-bay in the box for $391($900 reg) shipped. Kawi is closing out on them. No more 2" available. I hope its not too much.Maybee 1/2 throttle I'll be okay. Honda 2" just water same price. Kawi much better value and pump I hope? Greg, What mulch do you use?
__________________
http://www.PlanetLandscaping.net "Helping keep Earth Green" We use Ford F550 powerstrokes ,Mistubishi cabovers,Kubota Tractors and Excavators, Scag turf tigers,Exmark Lazers,Wright Standers, Shindiawa, Redmax , Finn Hydroseeder's and a bunch of other goodies. International Assoiciation of Hydroseeding Professionals, President: .
Reply With Quote
  #22  
Old 09-05-2003, 01:38 AM
GreginAlaska's Avatar
GreginAlaska GreginAlaska is offline
Banned
 
Join Date: Jun 2002
Location: L A W N T I M E S
Posts: 838
I think your Kawi will be fine if you throttle it down. It might be just right someday when you have that 3300 gallon Finn. :-)

For slopes we use EcoFibre plus which is a wood mulch with a guar based tack that is made by CanFor products in Canada. On real steep slopes we use EcoAegis,a bonded fiber matrix by the same company.

On flat ground we use a product called "astromulch" which is recycled newspaper and it is made in Anchorage.

They are about the only thing available up here.
Reply With Quote
  #23  
Old 09-05-2003, 04:52 AM
Planet Landscaping's Avatar
Planet Landscaping Planet Landscaping is offline
LawnSite Senior Member
 
Join Date: Oct 2002
Location: Oxford ct.
Posts: 607
Thanx greg
__________________
http://www.PlanetLandscaping.net "Helping keep Earth Green" We use Ford F550 powerstrokes ,Mistubishi cabovers,Kubota Tractors and Excavators, Scag turf tigers,Exmark Lazers,Wright Standers, Shindiawa, Redmax , Finn Hydroseeder's and a bunch of other goodies. International Assoiciation of Hydroseeding Professionals, President: .
Reply With Quote
  #24  
Old 09-10-2003, 12:39 AM
WhySod's Avatar
WhySod WhySod is offline
LawnSite Member
 
Join Date: Sep 2003
Location: Phoenix, AZ
Posts: 13
I've been watching this thread since Corby told me about www.lawnsite.com. I'd like to make a few comments before this subject fades into oblivion.

I've seen a lot of points of view presented here. Some I agree with, some I don't, but I'd like to point out that within the hydroseeding industry, there are actually two processes.

For about the last decade, hydroseeding is pretty much been defined as the application of 1,500 pounds of mulch per acre. Since "Lawn Tek" brought up www.hydroseeding.com, I'd like to comment that Turbo Turf makes a plastic recirculation type machine that's barely capable of exceeding that.

Admittedly, there are some high-end plastic machines that are actually capable of exceeding 1,500 pounds of mulch per acre, and are even capable of shooting "wood mulch." But you aren't going to get much more than a toy for $3,995.00. It will take long time to load, and will require an incredibly soupy mixture to pump through enough hose to reach into most back yards.

I have part-time competitor with a 150 gallon Turbo Turf machine and a 150 gallon nurse tank on his trailer. About a year after he started his business, he told me it's performance had declined to the point where he could barely shoot 35 pounds of mulch in his 150 gallon machine when he does a back-yard.

I've run tests in our clay soil here in Phoenix. In dry soil, I can put about 160 to 170 gallons of water on 1,000 s'f before puddling occurs. As far as I'm concerned, that's shooting colored water.

More recently, I just happened to be driving by one day and saw this guy shooting a job. I pulled over a few houses down to watch. A kid was on the end of the hose, while my competitor was breaking-up a 40 pound bale of jet-mulch into small-pieces into a plastic tub sitting between the two tanks. I hate to admit this but I laughed my --- off because it was a bit windy and almost as much of the mulch was blowing down the street as was going into the plastic tub.

I can't imagine trying to make a living with something that takes that much effort to load. He can't possibly get very much s/f done in a day. After withnessing that, I'd have to call his equipment a Turbo-toy. This guy has a hydroseeding hobby. If he wants to have an actual business, he really needs to upgrade his equipment.

You bet I bad mouth his equipment. In 1999 I got a lot of publicity. I also got 6 new cometitors. Four of these guys had Turbo Turf Machines. But he's the only one of them that's still around. I'm convinced it's only because he honors his call-backs. But why the heck should you have to have call-backs? Know what? My call-back-ratio here in Phoenix AZ (one of the hottest, dryest places in the Country), has been less than 1 out of 100 for more almost 8 years now.

I have some advice to anyone thinking about getting into the hydroseeding business with one of these kinds of machines. Make them demo it before you buy. And if they say it will shoot wood fiber mulch, make them prove it. Don't let them arrive with the tank full. You need to watch them load it.

I can cycle my 300 gallon Finn machine every 20 minutes with 3 - 50 pound bales of wood fiber mulch. That's as much as 1,200 pounds of mulch on the ground in an 8 hour day - with a 300 gallon machine. Try that with a 300 gallon Turbo Toy - it ain't going to happen.

Doubt what I'm saying? Ask Corby. He has a Turbo Turf machine. I'm certain that he'd love to tell you how much he regrets wasting his money on something that limits his ability to make a decent living. I call these plastic machines toys, but he has a less generous description for them...

And since Corby brought it up, there are two "trade organizations" that serve the hydroseeding industry. The International Erosion Control Association, http://www.ieca.org/, kind of includes us. It's absolutely worth the trip to their annual trade show if it's within driving distance.

But the Hydro Turf Planter's Association, http://www.htpa.org is flat-out all about improving the professionalism in the Hydroseeding industry. And dues are cheap. It only costs $100 a year. If you own a hydroseeding machine, Join. If you are thinking about buying a hydroseeding machine, join before you buy one.

They even have a "public" discussion forum, http://www.htpa.org/public/index.html with a Hydro Turf Business Section where people interested in getting into our industry can ask questions of HTPA members before they join the organization.

It started in Texas, but about a decade ago, the term Hydro-Mulching came into use. It has came to represent the application of more than 1,500 pounds of mulch (usually wood fiber mulch) per 1,000 s/f.

There are a lot of us in this industry who want people to know that un-like hydroseeding, "Hydro-Mulching" works every time.

Eleven years ago, when I started, I was influenced by an Ad I saw for Sanders Hydroseeding in Santa Ana Ca. It said "good enough just isn't..." "The finest materials, properly applied, with no skimping..." That's what I wanted to do.

In my early years, I was also influenced by Mr. James Lincoln. And that was long before he invented tha Turfmaker machine, http://www.turfmaker.com/. He's been preaching "Sod Quality Results" through a thick application of "wood fiber mulch" for longer than I can even remember.

It's unfortunate that a lot of people who visit his web site think he's just "bashing the competition." I look at it a little differently. I just think he figures that if he doesn't tell the truth about those "damned plastic machines' that are sleazing the industry (attribute that to me, not him) no-one else will. At least that's what I think.

Please, don't take this as a Turfmaker endorsement. There are a lot of good "mechanically agitated machines" on the market. Aqua Mulcher, Bowie, Finn, Kincaid, Turfmaker are all good machines. EZ Lawn and Reinco also make "mechanically agitated" machines. Any of them would be good choices.

I don't own a Turfmaker. I don't even think it has a big enough engine. And I've told Mr. Lincoln that. On the other hand, I got rid of a 500 gallon Bowie because I didn't think it had a big enough engine either. The 33 hp motor on my 800 gallon bowie can pump 50 pounds of wood mulch through 300 ft of hose with as little as 80 gallons of water. But it sucked the guts out of 4 trucks in the last 10 years. That's why it's sitting in my back yard. I don't need an 800 gallon machine for the 2 to 5 residential size lawns a day that I do.

Truth is, I don't think my new 300 gallon Finn has big enough engine either. I'd rather it have a 425 gallon tank like the Turfmaker or Kincaid machines. And after 11 years getting to used to Bowie's "positive displacement pump," the Finn's "centrifical pump" definately has a "learning curve" that I don't like much either... (If I had it to do over again I'd ask Bowie to custom build a machine for me - I found out too late they would...)

But the 360 gallon "nurse tank" on the trailer gives me the ability shoot and fill at the same time. Effectively, I can get a hell of a lot more bales of mulch on the ground in a day than a guy with a much bigger machine that has to take the time to wait for his hydroseeder to fill-up after each load.

I shoot 2 to 5 residential size lawns a day. I want to be able to use the least amount of water I can get away with, to put a thick layer of slurry on the ground - as fast as I can. (The thickness of the mulch has a lot to do with the evenness of germination.) But time is money. It often comes down to how many bales of mulch you can get on the ground by the end of the day... It's not about the size of the machine, it's about how many bales of mulch you can get on the ground by the end of the day.

And by the way, I have an aversion to employees... Workmens Comp., Payroll Taxes? Teaching employees how to become your competitors? I don't need it. I'd rather have an electric hose reel... (And you'd be surprised how easy it is to talk customers into helping me keep the hoses out from under my feet...)

For many years I bought into about half of what Mr. Lincoln said. I used to use a very thick application of recycled newsprint mulch. I discovered the thickness of the mulch had a lot to do with the evenness of the germination very early on... But truthfully, I was afraid of the "clogs" that often happen with "wood" mulch, so I avoided it.

When I joined the HTPA (about a year after it was formed), those guys convinced me I was using way too much seed. When I tried wood mulch I discovered that less than half the seed I'd been using resulted in better lawns. Turns out, applications of paper mulch thicker than 2,000 pounds per acre can "smother seed."

And OK, I admit I had to cut the fitting off of the end of the hose and use a fire hydrant to blow the clog out more than once, but I learned how to work with wood mulch. I don't have those kinds of problems any more.

To be "politically correct," there are some parts of the Country where less than 1,500 pounds per acre might be acceptable. But I know people in the Pacific NorthWest - and the NorthEast who would tell you that anything less than 2,000 pounds per acre "might result in a decent lawn," but if you want a sure thing...

My normal application rate is about 3,000 pounds per acre of 70% wood / 30% paper mulch. (OK, I still like a little paper in the mulch.) Very often, I'll drop two bales of wood to one bale of paper. But I can guantee you one thing, if you want a sure thing, you'd better be using 2,000 pounds of mulch per acre or more... And you just can't do that with a plastic toy...

Rick Hardy
Reply With Quote
  #25  
Old 09-10-2003, 03:01 AM
GreginAlaska's Avatar
GreginAlaska GreginAlaska is offline
Banned
 
Join Date: Jun 2002
Location: L A W N T I M E S
Posts: 838
I wouldn't buy a jet agitated machine either, that's why we have a TurfMaker 425 and a Bowie 1100. The Bowie has a diesel engine, I sometimes wish the Turfmaker had a small diesel.

I do wish that somebody would come up with a non-corroding mechanical agitated machine. I know some manufacturers are making stainless tanks but I can show you a bunch of corroded stainless steel at the seawater treatment plant I work in.

There must be a way to make a mechanical agitated composite (some would call it plastic) machine???


We have some of the opposite problems from Rick, some of the northern regions of Alaska have permafrost underneath and if you put on more than 1000 pounds per acre you will insulate the ground and cause the seed to be too cold to germinate. I was told this drove the DOT engineers crazy until they figured out the problem.
Reply With Quote
  #26  
Old 09-10-2003, 05:58 AM
Planet Landscaping's Avatar
Planet Landscaping Planet Landscaping is offline
LawnSite Senior Member
 
Join Date: Oct 2002
Location: Oxford ct.
Posts: 607
Guys got a Finn t 60. Is anybody Gov. certified? Is there such a thing? Anybody got gov specs? Gonna do a state airport.
__________________
http://www.PlanetLandscaping.net "Helping keep Earth Green" We use Ford F550 powerstrokes ,Mistubishi cabovers,Kubota Tractors and Excavators, Scag turf tigers,Exmark Lazers,Wright Standers, Shindiawa, Redmax , Finn Hydroseeder's and a bunch of other goodies. International Assoiciation of Hydroseeding Professionals, President: .
Reply With Quote
  #27  
Old 09-10-2003, 10:40 AM
WhySod's Avatar
WhySod WhySod is offline
LawnSite Member
 
Join Date: Sep 2003
Location: Phoenix, AZ
Posts: 13
I agree about the small diesel. I do small residential jobs. But I do a lot of them. That 15 hp motor on my 300 gallon Finn just doesn't have enough horsepower to pump as thick a slurry as I'd like through a small diameter hose.

They tell me that a 600 gallon Finn has the same clutch and pump assembly as my smaller machine. I haven't really checked it out yet, but the thought has occurred to me that it might be possible to install a 25 hp motor on it like the bigger machine.

For years I pulled around an 800 gallon bowie even though I didn't need it's capacity. But it's 33 hp motor gave it the ability to pump anything I asked it to. I miss that, but I sure don't miss the towing weight of the bigger machine. Of all the manufacturers I've talked to, the only one willing to put a big motor on a small machine was Bob Jones of Bowie.

Regarding plastic tanks. I don't see why someone couldn't build one with mechanical agitation. It's not about plastic vs steel, it's about manufacturing profit margin vs the ability to do the job. I wouldn't be surprised if Easy Lawn hasn't played around with the idea. They're now making a pretty innovative high-end mechanical agitation machine. (I think it has a stainless steel tank?)

By the way I stopped putting corrosive chemical fertilizer in my machine a long time ago. I'm convinced that most of the nutrients leach into the soil faster than the seeds can germinate and grow into the soil. I do ocassionally use an organic bio stimulant when the situation warrants it. But for the most part, I ask my customers to fertilize 2 weeks after they start watering. It works with my homeowner customer base. It you probably couldn't get away with it on most commercial jobs...

And I've heard that about Alaska. From time to time I've used charcoal to raise the temperature a degree or two. A Finn rep once told me one of their bio stimulant additives will get the seed to germinate in colder soil than it otherwise would. Do you guys do something similar?

Rick Hardy
Reply With Quote
  #28  
Old 09-10-2003, 11:57 AM
The Good Earth's Avatar
The Good Earth The Good Earth is offline
LawnSite Member
 
Join Date: Jan 2001
Location: Galloway, Ohio
Posts: 171
This whole mechanical vs. jet agitation thing is a bunch of crap. I think that mechanical agitation is the only way to go, but there is more than one way to skin a cat. The reality of the situation is that the customer wants to see green in a reasonable amount of time. End of story. It doesn't matter what you pull up to a job with, as long as you get the job done in a quality manner.

The biggest thing skipped in all these threads is prep work. Wanna make some good money hydroseeding, or any seeding for that matter? Prep the ground right. Learn what works and doesn't work. I read in another thread earlier that "A Harley Rake just brings the big rocks to the top and you pull those out and cover the other ones". I don't want to get on my soap box but roots don't grow through granite. Not the last time I tried, anyway. Loosen the soil up, get rid of the rocks, and do a soil test. Amend the soil right. And get your grades right. Be certain that the ground you have prepped will drain right and look right when you have a stand of turf on it. That will make customers more happy than 5 lbs. of seed instead of 3 lbs. of seed per 1K, wood mulch or paper mulch, or any thing else.

And since we aren't afraid to bad mouth equipment I'll put my 2 cents worth in. Rick, anytime you want to take the Pepsi Challenge with your Finn and my Turfmaker I'll be glad to do so. I can, and do on every job, put down 2500 lbs. per acre of Conwed 1000. I'm not saying that my machine will out work your machine but you won't be able to tell the difference. But when it comes time to do preventive maintenance on my 16 HP Kohler I know where the savings is. And since you brought up the whole HTPA thing lets throw this out as well. Why is it that threads like this aren't ever started on your guys website? I was a member when you all started up and really looked forward to threads like this. I still get posts in my e-mail that are posted on the contractors board and all of them lack the content and insight provided here at Lawnsite.
__________________
Jay Raley
Good Earth Grounds Management Company, Inc.

"Helping out Mother Earth, one lawn at a time."
Reply With Quote
  #29  
Old 09-10-2003, 06:46 PM
Lawn Tek Lawn Tek is offline
LawnSite Senior Member
 
Join Date: Dec 2002
Location: u s a
Posts: 459
For Whysod
Attached Images
 
Reply With Quote
  #30  
Old 09-10-2003, 06:48 PM
Lawn Tek Lawn Tek is offline
LawnSite Senior Member
 
Join Date: Dec 2002
Location: u s a
Posts: 459
Cheap, homemade 750 gal plastic machine "Lawn Tek"
'
Attached Images
 
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump






Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 09:32 PM.

Page generated in 0.08767 seconds with 8 queries