Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 09-26-2012, 04:16 PM
32vld 32vld is offline
LawnSite Gold Member
 
Join Date: Feb 2011
Location: LI NY
Posts: 3,275
Billy Goat lawn vacs

How good are they at picking up leaves, acorns, and stuff and leaving a clean looking lawn.

How good is using the accessory tube to vac leaves from underneath shrubs leaving the beds looking good ?
Reply With Quote
  #2  
Old 09-28-2012, 01:34 PM
Mr. Force™, Billy Goat Industries's Avatar
Mr. Force™, Billy Goat Industries Mr. Force™, Billy Goat Industries is offline
Sponsor
 
Join Date: Jan 2006
Location: Lee's Summit, MO
Posts: 498
Leaves, litter and general debris are picked up nicely. Acorns are a challenge for any vacuum. They're heavy (relative to size) when fresh, aerodynamically shaped, and if in grass they sink and hide below the majority of the air flow. A Billy Goat will get some on one pass but to really get them up you've got to back and forth under the tree like you would on carpet with spilled potting soil when using an indoor vacuum.
__________________
Drew Coates, AKA Mr. Force
Reply With Quote
  #3  
Old 09-28-2012, 03:11 PM
32vld 32vld is offline
LawnSite Gold Member
 
Join Date: Feb 2011
Location: LI NY
Posts: 3,275
Thanks for the response.
Last year I did my leafs with an 8'x12' tarp held down at the corners with an old screw driver through the grommet holes. Then dump the tarp in my trailer.

My goal this year was to find away to get the leaves into a bag the easiest way without raking.

Also looked to get the Trac Vac 385 to pull behind my John Deere mower. I like that better then just using the factory bagging system which just relies on the blades to move the debri into the bag and not clog the discharge tube.

The Trac Vac has a gas powered vacuum between the discharge deck and the collection unit to help keep things moving so the chute should less likely clog.

Though what I like about the 385 is that it discharges into a standard Rough Neck garbage pail which means directly into a liner. Barrel filled, tie knot, take out put in new liner.

Problem is I can't afford to buy both this year. Leaning to the Billy Goat because it will get through smaller gates and it has the accessory vac hose for beds and narrow tight spots.
Reply With Quote
  #4  
Old 09-28-2012, 03:16 PM
Mowingman's Avatar
Mowingman Mowingman is offline
LawnSite Platinum Member
 
Join Date: Feb 2001
Location: Texas
Posts: 4,462
As mentioned, they do a good job if the materials are dry. If wet, forget it.
The big problem is that with leaves, the bag fills in about 1 minute. Then, it takes 5 minutes to empty it and reinstall it on the machine. I found the frequent bag removal/dumping made the machine impractical for leaf work in lawn areas. Nice for small beds though. I used mine on 3 jobs and then sold it. Live and learn, lost a good bit of money on that deal.
__________________
Work Safe
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 08:39 AM.

Page generated in 0.05580 seconds with 7 queries