Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 10-09-2012, 05:07 PM
flashbang flashbang is offline
LawnSite Member
 
Join Date: Aug 2012
Location: ny
Posts: 31
Turf Tiger Drive shaft yoke bolt?

Bought it used with a advantage deck. I removed the deck and drive shaft. On the PTO side it has a spline and two bolts that hold the yoke on to the PTO shaft. The gear box side has a spline that the drive shaft yoke slips on to and a bolt hole with no bolt in it. It does have a set screw. Since the manual shows a different setup I do not know if it should get a bolt also. I would put one in but this may cause a unbalance shaft and wrech the gearbox. Anyone know what the poop is?
The pics explain better.
Attached Images
       
Reply With Quote
  #2  
Old 10-09-2012, 09:56 PM
ed2hess's Avatar
ed2hess ed2hess is offline
LawnSite Fanatic
 
Join Date: Nov 2002
Location: Austin Texas 78727
Posts: 11,582
I would put a bolt init and not worrry about it. Don't want it to come off. I am a little surprised about the heads on the bolts used they don't look like the kind I have on my gear cases.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 06:29 AM.

Page generated in 0.06874 seconds with 10 queries