The Green Industry's Resource Center

Jhpremier · #1 12-15-2012, 12:31 PM

Hey guys Im looking for a debris blower for my kubota b7300 if anyone can lead me in the right direction i would appreciate it

Cat 320D LRR · #2 12-15-2012, 01:43 PM

ive been looking at them to here are some site i found
http://www.buffaloturbine.com/cyclone%20pto.html

http://agrimetal.com/en/leaf-and-deb...debris-blower/

http://www.deere.com/wps/dcom/en_US/...s_blower.page?

Jhpremier · #3 12-15-2012, 04:06 PM

My kubota only has 12hp going to the pto the smallest pto driven debris blower I have found needed a minimum of 16hp to the pto.

gene gls · #4 12-15-2012, 07:06 PM

Quote:

Originally Posted by Jhpremier

My kubota only has 12hp going to the pto the smallest pto driven debris blower I have found needed a minimum of 16hp to the pto.

I have a 20 hp Walker mower that I run a Buffalo Turbine on. It turns very easy, no strain on my engin. Your tractor will run a brush hog mower or snow blower, that is much harder to turn than a turbine blower. I don't see why you would have a problem. See if there are any rental yards that have one in your area to try one out.

Jhpremier · #5 12-15-2012, 08:01 PM

I checked out the website looks like a pretty serious blower. How powerful are they? And whats the cost?

gene gls · #6 12-15-2012, 08:16 PM

Quote:

Originally Posted by Jhpremier

I checked out the website looks like a pretty serious blower. How powerful are they? And whats the cost?

up to 9500CFM
10" outlet pipe
150+ MPH
weight- 215 lbs.

I paid about $4200.00 for it about 6 years ago. Its a solid unit, replaced 2 nozzel pipes and 2 belts so far. The nozzel rotates from one side to the other so you have compleat control of where you want to blow with out having to turn around. It moves a mess of leaves fast and sure beats useing a push blower on a hill.