Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 01-05-2013, 06:14 PM
mikes166 mikes166 is offline
LawnSite Member
 
Join Date: Jul 2010
Location: Lakeland, Florida
Posts: 1
RainBird ASVF Valve - Back Pressure Issue

Hello - I just revamped my entire irrigation system to move the valve manifold and controller into a new shed I built. I have installed 7 new Rainbird 1" DAS-100 ASVF valves in the system, and have been testing them manually prior to connecting a controller. The valves work fine in terms of opening and closing, and water flow. However, several of them, when manually turned off (using the solenoid bleed control), have water flowing out of them onto the floor of the shed. Others do not exhibit this issue. I'm thinking that this may be due to back pressure from the lines. The valves are installed roughly 2 feet above grade, which seems well above the rotors and sprinklers. I can certainly extend the valves higher, but before I make that change I'd like to know if anyone can confirm that valve height is indeed the likely issue. Any suggestions and/or feedback on the cause of the water being pushed out of the valves after they have been closed would be greatly appreciated.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:54 PM.

Page generated in 0.05842 seconds with 9 queries