|
|
|
|||||||
| Hustler Turf Equip Lawn Mowers & Turf Care Equipment |
 |
|
|
Thread Tools | Display Modes |
|
#1
02-18-2013, 08:02 PM
|
|||
|
|||
|
Replacing Hustler Z Drive Belt??
My drive belt popped. I went to the dealer and bought a replacement belt. Tried putting it on this afternoon and it seems to be a bit short. Can't get it onto the pulleys. I checked the belt # I bought to the one in the manul and its correct. Maybe I'm doing something wrong. Does anyone have any tips on getting the belt on the pulleys?
Thanks Lyle 
|
|
#4
02-19-2013, 04:29 PM
|
||||
|
||||
|
Im assuming the Z is pretty much the same as the SZ...
There are holes for the tow hitch. Put some heavy string or thin rope through one of the holes and around the idler pulley or arm and bring rope back out another hole. Use the holes that line up best. Pull on the rope and it should make getting the belt over the idler pulley much easier.
|
|
#5
02-20-2013, 12:14 AM
|
|||
|
|||
|
correctly done. that is the reason for the 1/2 square cut out to allow the breaker bar to pull back the idler. It does sound a little tight though.
Brian O
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
All times are GMT -4. The time now is 01:23 PM.
Forum Rules:
This hustlerturfequipment.com sponsored forum is administrator monitored. LawnSite.com does not allow any manufacturer competitor attacks and will strongly enforce this. If you want your discussion to be viewable by the public and responded to in a professional manner then please keep your discussions professional and to the point.
All discussions are viewed by the administration before being released to the public. Your post may not be made viewable for up to 48 hours. Please allow the manufacturer representative enough time to respond to your question or comment once made viewable.
LawnSite.com is not affiliated with the Excel Hustler company. This forum is provided by LawnSite.com to Excel Hustler in order to better server their customers
Linear Mode
