Honda GX620..do you know valve rocker torque?

[mowisme]

for a Honda GX620 (horz) I looked all over net trying to find the rocker arm torque specs. I found the adjustment specs of valves..but not the rocker arm torque specs of the lock nut? thanks again.

[BigFish]

Why worry about it??? Just get em tight.

[mowisme]

thanks Big Fish..That's what I'll do then.

[BigFish]

I checked the maint. chart, and no torque spec. Gives one for the oil filter though. Go figure.
PM me and I'll try and email it to ya.

[piston slapper]

Originally Posted by BigFish

Why worry about it??? Just get em tight.

Tight..??? or Snug..???..that is the question...How snug is too tight..???

[BigFish]

Originally Posted by piston slapper

Tight..??? or Snug..???..that is the question...How snug is too tight..???

There's tight.........and there's snug. No question at all.

[BigFish]

I found the torque spec. in the owners manual. In one section it calls for 7 ft.lb, in another, it calls for 6.5 ft lb. So, like I said, tight!

Did you get that chart?

I'll try and send the Owners Manual.

[mowisme]

sent reply BigFish..Got them both!- thanks