G6 blades for a Lazer Z

[Blasko's Lawncare]

Hi, I just purchased an Lazer Z and looking to find the g6's because I've heard a lot of good about them. If anybody has other suggestions of blade type im all ears. I mow in Eastern PA so trying to prevent double cutting is HUGE. I've been looking for the last couple days and cant find the ones for my machine, any help is greatly appreciated.
Model Number:LZX27KC606

[Blasko's Lawncare]

Bump, anybody's response is greatly appreciated!

[Blasko's Lawncare]

Here's a pic of my new mower

[Schrock Lawns]

Jack small engine I think might have them theirs sponsors on this site who might have them also try ebay
Posted via Mobile Device

[Richard Martin]

Measure your current blade and post the measurements here. Measure the center hole size and from sharpened blade tip to sharpened blade tip. I'm thinking it should be a 20.5" blade with a .625" (5/8") center hole.

[weaver]

Originally Posted by Richard Martin

Measure your current blade and post the measurements here. Measure the center hole size and from sharpened blade tip to sharpened blade tip. I'm thinking it should be a 20.5" blade with a .625" (5/8") center hole.

Newer Lazer's have a 15/16 in center hole...

[weaver]

Originally Posted by Blasko's Lawncare

Hi, I just purchased an Lazer Z and looking to find the g6's because I've heard a lot of good about them. If anybody has other suggestions of blade type im all ears. I mow in Eastern PA so trying to prevent double cutting is HUGE. I've been looking for the last couple days and cant find the ones for my machine, any help is greatly appreciated.
Model Number:LZX27KC606

I just used the Exmark # and typed it in Ebay's search engine and here's what they have...


http://www.ebay.com/sch/i.html?_trks...at=0&_from=R40

[Blasko's Lawncare]

Thanks for the help so far guys and I found these http://www.ebay.com/itm/3-EXMARK-103...item2c6bf515dd Now how do I go about getting the blade number, those seem like the right ones but i just wanna make sure,im gonna go out and measure the blade but i don't wanna take it off to get the center hole measurement.

[weaver]

Originally Posted by Blasko's Lawncare

Thanks for the help so far guys and I found these http://www.ebay.com/itm/3-EXMARK-103...item2c6bf515dd Now how do I go about getting the blade number, those seem like the right ones but i just wanna make sure,im gonna go out and measure the blade but i don't wanna take it off to get the center hole measurement.

Those will fit.. newer lazers have 15/16 in center and that's the correct length also... Go to exmark.com quick refrence parts and cross #s....
Posted via Mobile Device

[Blasko's Lawncare]

Ok so I found the blade number and there aren't any G6's made that match up with it,the difference is the g6's are 20 3/4 while the ones I need are the 20.5 and my next and final question is whats the difference between the normal gators and the g6's, are the gators worth it?