The Green Industry's Resource Center

IRRITECH · #1 01-21-2013, 08:44 PM

Let me preface this by saying I HATE STIHL !!! The new carbs for the br600 are no longer adjustable with a screwdriver, you cannot buy the new adjusting tool from a dealer because stihl doesn't allow it. Does anyone know where I can get one or what they have used to make it work?

Why do i need to adjust the carb? A new carb on a 3 year old Br 600 gives me 6700 rpm. If that doesn't make sense to you then don't comment. if you have any legit ideas please let me know.

If you love Stihl, good for you, unless you have the answer to my question, don't comment.

Alsoif anyone has a parts breakdown for the 90, and 110 engines let me know. i may even be willing to pay for it.

dutch1 · #2 01-21-2013, 09:02 PM

If the adjustment needles are splined on the end you may want to take a look at the following link.

http://www.amazon.com/Genuine-Poulan.../dp/B000P8GKO2

IRRITECH · #3 01-21-2013, 09:12 PM

Quote:

Originally Posted by dutch1

If the adjustment needles are splined on the end you may want to take a look at the following link.

http://www.amazon.com/Genuine-Poulan.../dp/B000P8GKO2

It's not splined but a hex type, protected by a shroud. that being said for $9 that might work, thanks.

IRRITECH · #4 01-21-2013, 09:23 PM

I may have found a part # for it 5910 890 2307 does anyone know if this is right? If so I found them online.

BigFish · #5 01-21-2013, 11:56 PM

No comment...........

lawnboy dan · #6 01-22-2013, 07:39 AM

these tools are avl on ebay as well as amazon as mentioned. if its any comfort -i hate sthil also. not being to even access a parts breakdown is just absurd!

IRRITECH · #7 01-22-2013, 07:03 PM

Quote:

Originally Posted by lawnboy dan

these tools are avl on ebay as well as amazon as mentioned. if its any comfort -i hate sthil also. not being to even access a parts breakdown is just absurd!

No there not. if you can find one , with a picture, you're a better man than I.

IRRITECH · #8 01-22-2013, 07:16 PM

Quote:

Originally Posted by BigFish

No comment...........

and that contributed to this post how??? Have you ever had anything halfway intelligent to say??

BigFish · #9 01-22-2013, 07:31 PM

Quote:

Originally Posted by IRRITECH

and that contributed to this post how??? Have you ever had anything halfway intelligent to say??

Sure. Lets see now...............You HATE stihl, ya can't fix it...... so why not buy ya a nice little Ryobi, or Homelite, mayhaps a Craftsman or Poulan. You know.... somethin' you can FIX!