Register free!

The Green Industry's Resource Center



Reply
 
Thread Tools   Display Modes
  #1  
Old 03-10-2014, 09:53 PM
loganmower loganmower is offline
LawnSite Member
 
Join Date: Mar 2014
Location: Toledo, OH
Posts: 7
Someone Help Husqvarna

I have this Husqvarna W3613 since i started my business, great mower gets the job done. the only odd part is it is impossible to find stuff on the internet about it. '

I am curious to know how much it is worth and if anyone knows how to raise the cut?
Attached Images
     
Reply With Quote
  #2  
Old 03-10-2014, 09:55 PM
loganmower loganmower is offline
LawnSite Member
 
Join Date: Mar 2014
Location: Toledo, OH
Posts: 7
sorry the pics were sideways
Reply With Quote
  #3  
Old 03-10-2014, 10:01 PM
RedSox4Life's Avatar
RedSox4Life RedSox4Life is online now
LawnSite Senior Member
 
Join Date: Sep 2007
Location: Mass
Posts: 811
500-1500 depending on condition.

All fixed deck walk behinds I've ever seen adjust height 2 ways. By moving spacers on the front castors and spacers on the spindles themselves.
__________________
Landscape maintenance.
16 years experience, 10 as owner/operator.

And still not rich

Reply With Quote
  #4  
Old 03-10-2014, 10:05 PM
loganmower loganmower is offline
LawnSite Member
 
Join Date: Mar 2014
Location: Toledo, OH
Posts: 7
Quote:
Originally Posted by RedSox4Life View Post
500-1500 depending on condition.

All fixed deck walk behinds I've ever seen adjust height 2 ways. By moving spacers on the front castors and spacers on the spindles themselves.
If i would change the spacers in the front would the deck ow on an angle?
Reply With Quote
  #5  
Old 03-10-2014, 10:11 PM
RedSox4Life's Avatar
RedSox4Life RedSox4Life is online now
LawnSite Senior Member
 
Join Date: Sep 2007
Location: Mass
Posts: 811
Try it and see. Obviously adjusting the castor spacers is a lot easier than the spindle ones, so if you can get away with just them it'd be a lot easier on yourself.

Here's what to do.....

Move all the spacers to the top of the castor then measure the blades. Then move them all to the bottom and measure again.

The correct way to measure the blades is align so they're running front to back, then measure distance from front blade to the ground, and rear blade tip to the ground. There should be a 1/4-1/2" difference.
__________________
Landscape maintenance.
16 years experience, 10 as owner/operator.

And still not rich

Reply With Quote
  #6  
Old 03-11-2014, 12:23 PM
Valk's Avatar
Valk Valk is offline
LawnSite Silver Member
 
Join Date: Dec 2007
Location: Eastern KS
Posts: 2,721
FWIW, Husqvarna is no longer making/selling belt or hydro wide-area walk behind mowers.
__________________
---------------------------------------------------
~ cut it high ~ let it fly ~
---------------------------------------------------
Some folks are so contrary that if they fell into a river,
they'd insist on floating upstream.
~ Josh Billings
Reply With Quote
  #7  
Old 03-11-2014, 12:38 PM
TPendagast's Avatar
TPendagast TPendagast is online now
LawnSite Platinum Member
 
Join Date: May 2008
Location: Wasilla, AK
Posts: 4,010
Quote:
Originally Posted by Valk View Post
FWIW, Husqvarna is no longer making/selling belt or hydro wide-area walk behind mowers.
I'm sure someone else made those for them.
So completely basic, they had a 'lesco' look to them

Nothing wrong with basic, I'm sure they worked fine… just that they didn't sell enough to warrant the relationship with whomever was building them for them.
they probably had to commit to receiving X number of units per production cycle, to get someone to agree to bust them out on their behalf.

So they were probably selling X -
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.com™ - Moose River Media
All times are GMT -4. The time now is 08:23 PM.

Page generated in 0.07361 seconds with 10 queries