search sponsored by:
Advanced Search

The Green Industry's Resource Center

Old 02-05-2013, 10:52 PM
toddtech toddtech is offline
LawnSite Member
Join Date: Feb 2013
Location: Virginia
Posts: 1
Tecumseh 10hp

I rebuilt the carb on a Craftsman rear engine 30" cut and cleaned it to death with carb cleaner and ran a wire through the main and idle passages of the non adjustable jet nut. Model 502.256172, engine TVM220-157069E. Engine seemed to run good and surging settled when up to temp as I tested it in the 65 degree outdoors full speed and idle with no load. I ran at 32' and 44' recently and lots of surge so I am second guessing the rebuild. It is winter here. At the lower outdoor temps, idle is bad and all speed surge. If the blades are engaged, it runs perfectly. I just presume it is designed for warm weather and it is starving in the cold. If you add in choke, it will smooth out. Wondering if this is at all normal for these old 10hp tecumseh engines. Guessing 1984 vintage.

2nd question: The transmission is right under the seat on these. Is there a proper way to check the lube level in the transmission? And proper lube type?

3rd question: Is there service required for the axle hub where the chain goes around?
Reply With Quote
Old 02-05-2013, 11:38 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,996
1) There's a small sealed port in this carb with a small steel ball inside;

Once this ball sticks from bad fuel (gummed up carb) there's NO cleaning it..... NO soaking NO how NO way to free the ball. Toss the carb and install a new one.....

2) Peerless uses Bentonite grease in that trans gearcase, You have to remove the top to properly check and add grease as needed.

3) Not sure what you mean by axle "hub", If your thinking axle bearings/bushings, Some were oil impregnated bushings and some were sealed bearings. In either case nothing is required......
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...
Originally Posted by MannsLawnService View Post
some times the man in my mirror isn't so smart...
"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
Old 02-06-2013, 10:54 AM
Landrus2's Avatar
Landrus2 Landrus2 is offline
LawnSite Platinum Member
Join Date: Dec 2006
Location: Big apple
Posts: 4,928
I learned something today
Reply With Quote
Old 02-06-2013, 02:43 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,221
Originally Posted by joesimoes2 View Post
I learned something today
The day is still still have more to learn..
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
Old 02-07-2013, 01:11 AM
BigFish's Avatar
BigFish BigFish is offline
LawnSite Silver Member
Join Date: Jul 2008
Location: chesapeake, va
Posts: 2,527
Go here:
Find yer carb.
It ain't rocket science! far.

'Course if yer house has more wheels than yer truck...
" Old age ain't for sissies "
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Layout Style:

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 08:03 PM.

Page generated in 0.07693 seconds with 10 queries