Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 03-01-2013, 09:22 AM
Hayf Hayf is offline
LawnSite Member
 
Join Date: Aug 2012
Location: Nazareth , Pa.
Posts: 9
wood chippers

Hey guys! I am looking at a used chipper. Its a bandit 65 6". Has 1200 hours on it. been maintained well. Has a wisconsin 30 hp on it. Seller wants 6500. Sounds high to me, but wanted to know your thoughts. Also looking at older asplundh chuck and duck. Ran them in the past. good chippers if you are careful. Any input greatly appreciated
Reply With Quote
  #2  
Old 03-01-2013, 02:09 PM
YellowDogSVC's Avatar
YellowDogSVC YellowDogSVC is offline
LawnSite Gold Member
 
Join Date: Oct 2006
Location: TX
Posts: 3,544
That's not much of a chipper. Depending on what you do, bigger is better when chipping (less trimming).
I don't know much about chuck and ducks but I like the safety of feed wheels and a reverse bar. I owned a 9" with 50 hp diesel and operated the same model with a gas. Big difference. Go with diesel if you can.
__________________

"Life is tough, but it's tougher if you're stupid."

Twitter @Cedar_Clearing
Reply With Quote
  #3  
Old 03-01-2013, 02:14 PM
Landrus2's Avatar
Landrus2 Landrus2 is offline
LawnSite Platinum Member
 
Join Date: Dec 2006
Location: Big apple
Posts: 4,693
Yellow dog. Is right that's no much of Chipper. 30 hp is a small stump grinder
Reply With Quote
  #4  
Old 03-02-2013, 01:53 PM
fire126's Avatar
fire126 fire126 is offline
LawnSite Member
 
Join Date: Jun 2010
Location: Vernon Hills, IL.
Posts: 30
Thats not a bad price if it was maintain well. On a small chipper you will see gas engines. The Wisconsin is well built. The duck and chuck is not the way to go. Good luck.
__________________
Mark of Excellence
Landscape & Tree Care Specialist
Certified Arborist # IL 452
Landscape Design Degree

ALWAYS WORKING
Full time County Forestry- 26 years
Part time Firemen-22 years
Part time Landscape-31 years

79 Years, no wonder it hurts!
Reply With Quote
  #5  
Old 03-02-2013, 08:15 PM
metro36's Avatar
metro36 metro36 is offline
LawnSite Silver Member
 
Join Date: Aug 2006
Location: Long Island NY
Posts: 2,338
The first time I rented a chipper, I rented a 6" vermeer. It did ok but it took a lot of trimming to get limbs to feed and it would jamb easily. After that I got a 12" diesel. There is really no comparison between to two. The 12" breezes through what the 6" struggled with and you dont have to do much trimming. I you can get it to the chipper, it will chip it. It saves so much time, I dont bother with the 6" any more.

I would look for something bigger with a diesel.
__________________
More equipment then I know what to do with.
Reply With Quote
  #6  
Old 03-02-2013, 08:32 PM
gene gls's Avatar
gene gls gene gls is offline
LawnSite Gold Member
 
Join Date: Dec 1999
Location: Granville, Ma. 01034
Posts: 3,086
For you guys that own your own chippers, do you sharpen your blades or throw the dull ones out and replace with new? Thanks.........
Reply With Quote
  #7  
Old 03-02-2013, 09:25 PM
RSK Property Maintenance's Avatar
RSK Property Maintenance RSK Property Maintenance is offline
LawnSite Bronze Member
 
Join Date: Apr 2011
Location: Manchester,CT
Posts: 1,452
I wouldn't even consider a chipper unless it had 12" capacity or bigger, and was diesel.....i owned a chipper for a little over a year, and it was diesel and had a 12" capacity it was older but still served me great for the money i paid, i ended up selling about a month ago because i haven't used it since the summer and don't really do tree work, but with all the damage we got from hurricane irene in 2011 i busted my ass for about 4 weeks loading a dump truck by hand and bought a chipper and saved lots of time, and made a ton of money with it doing storm clean ups for almost a year.
__________________
fully lic. and ins. 10yrs exp.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 07:58 AM.

Page generated in 0.06544 seconds with 9 queries