7x16 Enclosed Trailer Setup

[sticklelm]

Originally Posted by CowboysLawnCareDelaware

Are you sure that it's a 7x16, it only looks 6' wide to me. You may want to measure.

-Michael

Originally Posted by JContracting

I'm going to agree with you on that until I see a measurement.
Posted via Mobile Device

it definately looks pretty tight with that 60" mower. i can fit my 48" and 21" side by side in my 7x16 with about...5-7inches of space

[Davids Lawncare]

Just pickup the npr 1month ago so I'm not sure on mpg. But what i researched from other guys on this site was it was somewhere in the range of 14mpg loaded with trailer for the turbo diesel. For the measurements I can tell you that today I cut an interior shelf for the front of trailer at 78" wide add the 3/4 plywood sides I'm at 79.5". I would guess the back would be a little wider. I think it's the black that makes it look a little smaller than it really is. I have maybe 1 ft or so walking space on trimmer side and few inches on the blower side. Plus there is decal on the rear that says 7x16...

[Blasko's Lawncare]

Its not a true 7 footer, because if it was it would be 84" wide meaning you would have a foot of space on each side of the mower deck witch is 60". I've seen it before its nothing that uncommon that the trailer is 79" wide but there still calling it 7x16.

[PlantscapeSolutions]

Check out my old thread with my 16' Pace http://server1.lawnsite.com/showpost...57&postcount=1. I did quite a bit of customizing. It takes a lot of thought and money to really set up a trailer nicely.

[CowboysLawnCareDelaware]

Originally Posted by PlantscapeSolutions

Check out my old thread with my 16' Pace http://server1.lawnsite.com/showpost...57&postcount=1. I did quite a bit of customizing. It takes a lot of thought and money to really set up a trailer nicely.

How do you like your Shindaiwa trimmers? Why did you decided to take the guard off the bottom?

-Michael

[PlantscapeSolutions]

You will find the guards tend to come off with most companies because it's just extra weight and it really doesn't keep you from getting beaned by debris. You must watch your guys string length once the guards come off because longer lines put more stress on the clutch and engine. The engine will not operate at the intended rpm if the line gets much longer then the OEM length. Longer line equals more heat.

[Davids Lawncare]

Plantscape that is a nice setup you have. You ain't lying about thought and $$$. Love the wrap that looks amazing. I'm working on lettering mine but I really want to redesign to whole thing. Here is a thread of want my vinyl man has sent me so far. He doesn't do design its just the picture I had from my previous trailer magnets on my truck. Do you have any pictures of the ceiling selves?

http://www.lawnsite.com/showthread.php?t=397896

[sticklelm]

i really like that vnose trailer

[jequigle]

78" wide is 6.5' not 7'

[Davids Lawncare]

lol. For you guys that needed measurements on the actual size of an Classified 7x16 LEONARD TRAILER. Here you go.