Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #1  
Old 04-08-2013, 08:05 PM
themadcutter themadcutter is offline
LawnSite Senior Member
 
Join Date: Nov 2010
Location: florida
Posts: 723
stihl 100rx clutch drum/bell housing replacement?

I have a 100rx and the bearings in the clutch drum seized up.

Does the drive shaft come off the clutch drum or is it one piece?

thanks
Reply With Quote
  #2  
Old 04-08-2013, 08:54 PM
dboyd351 dboyd351 is offline
LawnSite Senior Member
 
Join Date: Sep 2010
Location: Cape Charles, VA
Posts: 855
I'm pretty sure the drive shaft will detach from the clutch drum (it's not one piece).
What bearings are you talking about? Do you mean the clutch will not disengage? If so, that's probably weak or broken clutch springs.
Reply With Quote
  #3  
Old 04-08-2013, 09:07 PM
themadcutter themadcutter is offline
LawnSite Senior Member
 
Join Date: Nov 2010
Location: florida
Posts: 723
Quote:
Originally Posted by dboyd351 View Post
I'm pretty sure the drive shaft will detach from the clutch drum (it's not one piece).
What bearings are you talking about? Do you mean the clutch will not disengage? If so, that's probably weak or broken clutch springs.
I could not get the shaft out. after some cleaning I see some sort of retainer clip in the neck but I don't think thats for the shaft. The inner shaft just won't pull out of the housing.

the bearings in the bell housing won't spin freely. The front housing where the clutch drum is , is what I call the bell housing. some people call it the front housing or clutch housing. The actual clutch and clutch springs are fine.
Reply With Quote
  #4  
Old 04-08-2013, 09:17 PM
dboyd351 dboyd351 is offline
LawnSite Senior Member
 
Join Date: Sep 2010
Location: Cape Charles, VA
Posts: 855
Try this:
http://www.urmediazone.com/signup?sf...+parts+diagram

Should link you to an illustrated parts list for your machine, so you can what parts go where.
Good luck.
Reply With Quote
  #5  
Old 04-08-2013, 09:23 PM
themadcutter themadcutter is offline
LawnSite Senior Member
 
Join Date: Nov 2010
Location: florida
Posts: 723
Quote:
Originally Posted by dboyd351 View Post
Try this:
http://www.urmediazone.com/signup?sf...+parts+diagram

Should link you to an illustrated parts list for your machine, so you can what parts go where.
Good luck.


Thanks. I'll look it over in the morning
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 01:10 PM.

Page generated in 0.06208 seconds with 9 queries