Register free!
Search
 
     

The Green Industry's Resource Center


Click for Weather
Reply
 
Thread Tools Display Modes
  #11  
Old 02-27-2013, 07:29 PM
larryinalabama larryinalabama is offline
LawnSite Fanatic
 
Join Date: Jan 2008
Location: Ragland Al
Posts: 9,509
Quote:
Originally Posted by piston slapper View Post
Well...let me see if I can type this without the spellchek kickin it out...

Larry...a BFH is a ...BIG FRIGGIN HAMMER...
Well if you have a BFH and are "The Piston Slapper" ..........some might get confused about whats actually happening.
Reply With Quote
  #12  
Old 02-27-2013, 08:41 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,522
Quote:
Originally Posted by piston slapper View Post
Here's one I robbed from RestroRob...

Remove the flywheel bolt..
Smack the PTO end of the crank with a BFH

Comes loose everytime...Thanx Rob....

Since Slapper "robbed" MY trick..........

I just want to clarify this works on any engine and vertical shafts as well as the horizontals as shown. Also works to remove generator rotors from crankshafts, Remove the recoil assembly to access the crankshaft then only loosen the rotor through bolt. Couple smacks and pop goes the rotor.....
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #13  
Old 02-27-2013, 09:00 PM
piston slapper's Avatar
piston slapper piston slapper is offline
LawnSite Platinum Member
 
Join Date: Mar 2010
Location: Tampa Fl
Posts: 4,008
Quote:
Originally Posted by Restrorob View Post
Since Slapper "robbed" MY trick..........

I just want to clarify this works on any engine and vertical shafts as well as the horizontals as shown. Also works to remove generator rotors from crankshafts, Remove the recoil assembly to access the crankshaft then only loosen the rotor through bolt. Couple smacks and pop goes the rotor.....
Thanx for clearing that up...
Those instructions are better than the ones I got when I robbed it from you...
Thanx again...that trick has saved me a bunch of work...
__________________
If You Have All The Answers...Except The One You Need...You're Not Trying Hard Enough...
Do The Work
Reply With Quote
  #14  
Old 02-27-2013, 09:10 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,522
Quote:
Originally Posted by piston slapper View Post
Those instructions are better than the ones I got when I robbed it from you...

Awww..... Come on Slapper..... Once you seen that work so well on the engine you were work'n on, You should'a figgerd out it would work on any engine !

Easier than muck'n around with a puller eh.....
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #15  
Old 02-27-2013, 10:29 PM
herler herler is online now
LawnSite Gold Member
 
Join Date: Apr 2012
Posts: 3,234
How to unload a trailer load of brush in 10 minutes, solo, without sweat or foul language.

Requirements:
1. Lay down a length of chain down center of trailer before loading (hooks at the ends helps).
2. Carry extra lengths of chain and straps with you to the dump site.
3. Find something HEAVY around which to wrap chain / straps to back up against.
4. Once secured simply drive forward SLOWLY!!! while monitoring progress.
5. Collect various lengths of chain and straps afterwards.
6. Blow off floor boards for that neat and clean look.

Works every dang time, even with leaves.
Attached Images
               

Last edited by herler; 02-27-2013 at 10:39 PM.
Reply With Quote
  #16  
Old 02-28-2013, 07:56 AM
Landrus2's Avatar
Landrus2 Landrus2 is offline
LawnSite Platinum Member
 
Join Date: Dec 2006
Location: Big apple
Posts: 4,690
Hey herler And no need of FBH to free that load
Reply With Quote
  #17  
Old 02-28-2013, 05:44 PM
Restrorob's Avatar
Restrorob Restrorob is offline
LawnSite Fanatic
 
Join Date: Apr 2005
Location: Show'n my truck off !
Posts: 10,522
Quote:
Originally Posted by herler View Post
How to unload a trailer load of brush in 10 minutes, solo, without sweat or foul language.

Hey herler..... Good idea !

But...... Moving all these logs around looks like more work than I'd want to do, Then what if there isn't any ?




Throw one of these in the truck..... Give it a couple stomps in the ground and go !




Just a thought.....
__________________
Quote:
Originally Posted by piston slapper View Post
You never learn anything until you admit you don't know it all...

"Why go out preserved when you can go out beat up, worn out, sliding in sideways screaming, Holy Sh!t What A Ride" !!!
Reply With Quote
  #18  
Old 02-28-2013, 06:33 PM
Landrus2's Avatar
Landrus2 Landrus2 is offline
LawnSite Platinum Member
 
Join Date: Dec 2006
Location: Big apple
Posts: 4,690
What is the name of that tool.
Reply With Quote
  #19  
Old 02-28-2013, 06:33 PM
Landrus2's Avatar
Landrus2 Landrus2 is offline
LawnSite Platinum Member
 
Join Date: Dec 2006
Location: Big apple
Posts: 4,690
Hey Rob What is the name of that tool
Reply With Quote
  #20  
Old 02-28-2013, 06:41 PM
teckjohn teckjohn is offline
LawnSite Member
 
Join Date: Aug 2010
Location: Enterprise Alabama
Posts: 178
Its a boat anchor

Is that the one ur talkin about?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump





Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Copyright ©1998 - 2012, LawnSite.comô - Moose River Media
All times are GMT -4. The time now is 05:48 AM.

Page generated in 0.09900 seconds with 8 queries